Remington 491 operating instructions Index

Page 2

INDEX
Warning: Safety Precautions	3-11
Why A Fastener Holds	12
Selecting Fasteners and Power Loads	13
Operation	14
Parts List	16
Cleaning and Maintenance	17
Tool Disassembly	18
Tool Assembly	21
Troubleshooting	23
Fasteners	24
Application Chart	24
Parts Central	26
Warranty	Back Cover
REMINGTON
Powerdriver Model 491

The Remington Powerdriver Model 491 is designed for use with Remington 27 caliber power load strips and Remington power fasten- ers which are no longer than 2 1/2"*. Remington power fasteners are manufactured from special steel and heat treated to produce a very hard yet ductile fastener.

Maximum 2 1/2"*

Spall Shield

Barrel Trigger

Assembly

Muzzle/Guide

Recommended

Approved

Goggles

Power Load

Strip

*3" fasteners can be used with optional guide, part number 301110.

099494

Image 2

Contents Remington Powder Actuated ToolIndex ? ? Safety Precautions Handling the ToolPowd Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners GREEN? RED? Unload Why a Power Fastener Holds WHY a Power Fastener Holds ConcreteSelecting Power Fasteners and Power Loads OverdriveOperation Water Parts List Key Part Description QtyCleaning and Maintenance Separating Base Plate From Piston Sleeve Removing Rubber PAD Removing Rock ARMRemoving Liner from Tool Body Removing Trigger AssemblyRemoving Firing PIN Attaching Firing PIN Assembly Tool AssemblyAttaching Trigger Assembly to Tool Body Attaching Liner to Tool BodyAssembling Barrel Assembly Attaching Rubber PADTroubleshooting Guide Problem Possible Cause RemedySP Fasteners Application ChartFasteners Load Color Code Parts Central Portable Heater Parts Clark SupplyMaintenance Log Limited Warranty Agreement Canada, Inc

INDEX

REMINGTON

Powerdriver Model 491