Application Chart
IMPORTANT
•Recommended for use with Remington power load strips and power fasteners.
•Only use power fasteners up to 2 1/2" long with standard guide. Power fasteners 3" long can be used with optional guide, part number 301110.
•If power fastener goes below the top surface of the board, use penetrating control disc (* see illustration below).
•Always wear approved eye and ear protection.
*Use power fastener with penetration control disc, part number 015549.
|
| Load |
| Color Code | ||
27 CALIBER | Level | Load | Case |
| ||
Number | Strength | Body | Head | |||
strip loads for |
|
|
|
|
| |
| 3 | medium | brass | Green | ||
powder | ||||||
4 | heavy | brass | Yellow | |||
actuated tools | ||||||
|
|
|
| |||
|
| 5 | extra heavy | brass | Red | |
|
|
|
|
|
| |
099494 | 25 |