Woodstock W1500 manual Section X Warranty

Page 21

SECTION X: WARRANTY

Woodstock International, Inc. (Woodstock) warrants this product against defects in workmanship and mate- rials for a period of one year from the original date of purchase. We will repair or replace at our option, any part or parts of the product covered under this warranty which, after examination, proves to be defective in workmanship or material during the warranty period. This warranty does not cover repair or replacement due to misuse, abuse, negligence, accidents, un-autho- rized repairs, alterations or lack of maintenance. This warranty does not cover loss of use of product during repairs —either under warranty or otherwise.

This is Woodstock’s sole written warranty and any and all warranties that may be implied by law, includ- ing any merchantability or fitness, for any particular purpose, are hereby limited to the duration of this writ- ten warranty. We do not warrant or represent that the merchandise complies with the provisions of any law or acts. In no event shall Woodstock’s liability under this warranty exceed the purchase price paid for the product and any legal actions brought against

Woodstock shall be tried in the State of Washington, County of Whatcom.

We shall in no event be liable for death, injuries to per- sons or property or for incidental, contingent, special or consequential damages arising from the use of our products.

Woodstock reserves the right to change specifications at any time as we constantly strive to achieve better quality equipment. We make every effort to ensure that our products meet high quality and durability standards and we hope you never need to use this warranty.

-20-

Shop Fox®

Image 21
Contents Shop Fox Table of Contents Read Instructions Before Using The Shop Fox Safety Instructions For All ToolsSection I Introduction Additional Safety Rules For The Shop Fox Commentary Piece Inventory Section II Assembly Lock KnobsClamping Mechanism Mounting the clamping bracket to Shop Fox Angle BracketSection III Adjustments Sliding TableHold-Down Bracket Face Plate Miter Bar Parallelism Section IV SET-UP Planning Horizontal ClampingClamping your Work Angled clamping for miter joint set-up Vertical Clamping Other Clamping MethodsClearance Section V Operations General ProceduresHorizontal Work Vertical Work Angled Work Using a bevel gauge for setting up Angled workSection VI Closure Model W1500 Shop FOX Section VII SpecificationsSection Viii Part Diagram Angle Bracket Section IX Part ListSection X Warranty