Dell MD3600f Installing and Removing SFP Modules, Installing and Removing Fibre Channel Cables

Page 12

Installing and Removing SFP Modules

To install SFP modules:

1If all the FC IN ports have an SFP module installed, go to step 5.

2Remove the SFP module from the static protective package.

3Remove the protective cap from the SFP module and SFP port. Store the protective caps for future use.

4Insert the SFP module into the host port until it clicks into place.

5Connect an FC cable. See "Installing and Removing Fibre Channel Cables" on page 10.

To remove SFP modules:

1Remove the FC cable from the SFP module. See "Installing and Removing Fibre Channel Cables" on page 10.

NOTE: To avoid damaging the cable or the SFP module, disconnect the FC cable before removing the SFP module.

2Unlock the SFP module latch. For SFP modules that contain wire tabs, unlock the SFP module latch by pulling the wire latch outward 90°.

3With the SFP module latch in the unlocked position, remove the

SFP module. For SFP modules that contain wire tabs, grasp the wire latch and pull the SFP module out of the port.

4Replace the protective cap on the SFP module and the host port.

5Place the SFP module into a static-protective package.

Installing and Removing Fibre Channel Cables

WARNING: Data processing environments can contain equipment transmitting on system links with laser modules that operate at greater than Class 1 power levels. Never look into the end of an optical fiber cable or open receptacle.

Before installing an FC cable, see "Guidelines for Using Fiber Optic Cables" on page 4.

To install an FC cable:

1If applicable, remove the protective cap from the SFP module and store the protective cap for future use.

2Remove the two protective caps from one end of the cable and store them for future use.

10

Getting Started With Your System

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Getting Started With Your System Page Regulatory Model Series E03J and E04J 1K67M Dell PowerVault MD1200 and Dell PowerVault MD1220 Before You BeginWorking With SFP Modules and Fiber Optic Cables Getting Started With Your SystemGetting Started With Your System Other Documentation and Media You May Need Supported Operating SystemsCommon Configurations Server PowerVault MD3600fCabling Your Direct-Attached Hosts Switch PowerVault MD3600f Series storage array Cabling Your SAN-Attached HostsUp to 64 hosts Installation and Configuration Installing the Rails and System in a RackUnpacking the System Connecting the Power Cables Securing the Power CablesInstalling and Removing SFP Modules Installing and Removing Fibre Channel CablesGetting Started With Your System Cabling Your Expansion Enclosure Turning On the Storage ArraySeries expansion Installing the Bezel Installing HBAs and DriversInstalling the MD Storage Software Locating Your Service Tag Technical Specifications NOM Information Mexico OnlyConnector Management of the enclosure Expansion PowerVault MD1200 seriesWithout using the Premium Feature is If the controller is unable to get an IP addressPower supply/fan fault, and AC status PasswordStorage array Ms or less Operational orientation Storage Six consecutively executed shock pulsesEach side of the system of 71 G for up to 2 ms Guide de mise en route Remarques, précautions et avertissements Avant de commencer Fonctionnement des modules SFP et des câbles à fibre optiqueGuide de mise en route Systèmes dexploitation pris en charge Configurations courantes PowerVault série MD3600fCâblage des hôtes reliés directement ServeurCâblage des hôtes reliés au réseau SAN Matrice de stockageInstallation et configuration Installation des rails et du système dans un rackDéballage du système Branchement du ou des câbles dalimentation Fixation du ou des câbles dalimentationInstallation et retrait des modules SFP Installation et retrait de câbles Fibre ChannelGuide de mise en route Câblage de votre boîtier dextension Mise sous tension de la matriceBoîtier dextension En optionInstallation du cadre Installation de cartes HBA et de pilotesInstallation du logiciel MD Storage Identification du numéro de service Informations NOM Mexique uniquement Caractéristiques techniquesDe gestion Hors bande du boîtier La connectivité à chemin redondant fournit desContrôleur RAID Les voyants avant et le bouton didentificationTrois voyants détat état du bloc dalimentation Commutateur Bouton didentificationMot de passe Lappel de courant peut atteindre 55 a par bloc Dalimentation pendant un maximum de 10 ms168 mètres 550 pieds Dhumidité maximal de 10 % par heureMinutes Introdução ao uso do sistema Notas, Avisos e Advertências Antes de começar Trabalhar com módulos SFP e cabos de fibra óticaIntrodução ao Uso do Sistema Introdução ao Uso do Sistema Outros documentos e mídias dos quais você pode precisar Sistemas operacionais suportadosConfigurações comuns Servidor Matriz de armazenamento PowerVault série MD3600fCabeamento de hosts conectados diretamente Comutador Matriz de armazenamento PowerVault série MD3600f Cabeamento de hosts conectados à SANAté 64 hosts Instalação e configuração Remover o sistema da embalagemInstalar os trilhos e o sistema no rack Conectar os cabos de alimentação Prender os cabos de alimentaçãoInstalar e remover módulos SFP Instalar e remover cabos de canal de fibraIntrodução ao Uso do Sistema Cabeamento do gabinete de expansão Ligar a matriz de armazenamentoGabinete de expansão OpcionalInstalar o bezel Instalar HBAs e driversInstalar o software de armazenamento MD Localizar a etiqueta de serviço Especificações técnicas Frequência 50/60 Hz Consumo de correnteGB de cache por controlador PowerVault MD1200 ou PowerVault MD1220 Primário e secundário são 192.168.128.101 eSuporte para 192 discos rígidos é um recurso Premium éIndicadores de LED Painel frontal Do sistemaDois LEDs de cor única para indicação de Alimentação e de modo do gabineteMáximo Temperatura ambiente de funcionamento do Atingir um máximo de 55 a por fonte deAlimentação por 10 ms ou menos ProfundidadeRequisitos ambientais Temperatura De operação De armazenamentoDe 20C por hora Umidade relativa De operaçãoIntroducción al sistema Notas, precauciones y avisos Antes de comenzar Cómo trabajar con módulos SFP y cables de fibra ópticaIntroducción al sistema Introducción al sistema Documentación y soportes adicionales útiles Sistemas operativos admitidos Configuraciones comúnes Serie PowerVaultCableado de los host de conexión directa Servidor Matriz de AlmacenamientoCableado de los host de conexión SAN Instalación y configuración Desembalaje del sistemaInstalación de los rieles y del sistema en un bastidor Conexión de los cables de alimentación Fijación de los cables de alimentaciónInstalación y extracción de módulos SFP Instalación y extracción de cables Fibre Channel Cableado del gabinete de expansión Para extraer un cable FCEncendido de la matriz de almacenamiento Matriz de almacenamiento de la serie MD3600fInstalación del bisel Instalación de adaptadores HBA y controladoresInstalación del software MD Storage Introducción al sistema Localización de la etiqueta de servicio Información de la NOM sólo para MéxicoImportador Número de modelo E03J y E04J Voltaje de Especificaciones técnicas Expansión Serie PowerVault MD1200 Expansión PowerVault MD1200 o PowerVaultCon cualquier combinación de gabinetes de Utilizar la función Premium esUno de actividad Ethernet de administración Ocho enlaces FC o erroresUno de batería defectuosa Uno de caché activaMáxima 29,30 kg 64,6 libras24,22 kg 53,4 libras Peso vacío 61 kg 19 libras Introducción al sistema334 m 1 F/550 pies Almacenamiento Seis impulsos de descarga ejecutadosDurante un máximo de 2 ms Altitud En funcionamientoIntroducción al sistema Page W. d e l l . c o m s u p p o r t . d e l l . c o m Page Imprimé aux U.S.A Impresso nos EUA Impreso en los EE.UU
Related manuals
Manual 15 pages 37.81 Kb Manual 318 pages 20.85 Kb Manual 38 pages 3.57 Kb Manual 312 pages 41.97 Kb Manual 268 pages 41.83 Kb

MD3620F, MD3600f specifications

Dell's MD3620F and MD3600F storage arrays are designed for businesses seeking dependable, high-performance storage solutions tailored to meet the demands of modern data management. These models offer a blend of scalability, efficiency, and advanced features, making them well-suited for a range of applications, from virtual environments to critical database operations.

One of the primary features of the MD3620F and MD3600F is their support for a hybrid storage architecture. This approach allows organizations to combine flash storage with traditional hard disk drives (HDDs) to optimize performance and cost. The MD3620F focuses heavily on all-flash configurations, delivering exceptional speed and lower latency, ideal for I/O-intensive workloads.

Scalability is another hallmark of these storage solutions. The MD3600F allows users to scale up to 120 drives, providing robust capacity to meet growing data needs. The MD3620F is engineered for environments where data availability and speed are paramount, with support for high IOPS (Input/Output Operations Per Second) and consistent performance under stress.

In terms of data management, both systems integrate with Dell’s proprietary software, which enhances operational efficiency through features like automated tiering. This technology optimizes data placement between different storage types based on access frequency, ensuring that hot data is readily available while reducing costs associated with less critical data.

Reliability is crucial for businesses that depend on their storage systems. The MD3620F and MD3600F come equipped with advanced data protection mechanisms, such as RAID support, which safeguards against data loss, and snapshot capabilities that provide point-in-time copies of data. Moreover, these solutions include hot-swappable components, ensuring minimal downtime for maintenance and repairs.

Connectivity is also a strong suit of these storage arrays. They support multiple connectivity options, including SAS and iSCSI, allowing for flexible integration into existing IT infrastructures. This adaptability enhances their appeal to a wide range of enterprise environments.

In summary, the Dell MD3620F and MD3600F stand out as robust storage solutions with a combination of hybrid and all-flash configurations, scalability, advanced data management tools, and enhanced reliability features. These characteristics make them ideal for organizations looking to enhance their data storage capabilities while maintaining high performance and efficiency.
Top Page Image Contents