Adjustable Torque Clutch, To Adjust Torque

ADJUSTMENTS

ADJUSTABLE TORQUE CLUTCH

See Figure 6.

When using your drill-driver for various driving applications, it becomes necessary to increase or decrease the torque in order to help prevent the possibility of damaging screw heads, threads, workpiece, etc. In general, torque should correspond to the intensity of the screw diameter. If the torque is too high or the screws too small, the screws may be damaged or broken.

The torque is adjusted by rotating the torque adjustment ring. The torque is greater when the torque adjustment ring is set on a higher setting. The torque is less when the torque ad- justment ring is set on a lower setting.

The proper setting depends on the type of material and the size of screw you are using.

TO ADJUST TORQUE

■Identify the twenty four torque indicator settings located on the front of the drill.

■Rotate adjusting ring to the desired setting.

•1 - 4 .................. For driving small screws.

•5 - 8 .................. For driving screws into soft material.

•9 - 12 ................ For driving screws into soft and hard materials.

•13 - 16 ..............For driving screws in hard wood.

•17 - 20 ..............For driving large screws.

•21 - 24 ( ) .... For heavy drilling.

BIT STORAGE

See Figure 7.

When not in use, bits provided with your drill can be placed in the storage area located on the top of your drill.

TO DECREASE

TORQUE

ADJUSTMENT

RING

TO INCREASE

TORQUE

Fig. 6

SCREWDRIVER BITS

BIT

STORAGE

AREA

Fig. 7

Page 12