SPECIFICATIONS
| SA960 | SA120 |
Chuck | 3/8 in. (10 mm) Keyless | 3/8 in. (10 mm) Keyless |
Motor | DC Motor 9.6 Volt | DC Motor 12 Volt |
Switch | Variable Speed | Variable Speed |
No Load Speed | 0 - 550 RPM | 0 - 550 RPM |
Clutch | 24 Positions | 24 Positions |
Charger Input | 120 V, 60 Hz, AC only | 120 V, 60 Hz, AC only |
Charge Rate | ||
Torque | Maximum 90 in.lb. | Maximum 95 in.lb. |
UNPACKING
INSTRUCTIONS
When unpacking the tool:
■Carefully remove the tool and accessories from the box.
■Make sure that all items listed in the packing list are in- cluded.
■Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
■Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
■If any parts are damaged or missing, please call
PACKING LIST
Cordless Drill
Charger
Battery Pack
28 Piece Bit Kit
Operator’s Manual
Case
WARNING:
If any parts are missing do not operate the tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
APPLICATIONS
You may use the two speed drill for the purposes listed below:
■Drilling in wood
■Drilling in ceramics, plastics, fiberglass, and laminates
■Drilling in both hard and soft metals
■Using driving accessories, such as driving screws with screwdriver bits
■Mixing paints
Page 7