Ryobi TS1350 warranty Carrying Handle, Miter Lock Handle, Spindle Lock Button, Trigger Lock

Page 10

FEATURES

CARRYING HANDLE

See Figure 3.

For convenience when carrying or transporting your miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 3. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin.

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks your saw at desired miter angles.

SPINDLE LOCK BUTTON

See Figure 4.

A spindle lock button has been provided for locking the spindle which keeps the blade in your saw from rotating. Depress and hold the lock button while installing, changing, or removing blade only.

TRIGGER LOCK

See Figure 5.

To prevent unauthorized use of your compound miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a long shackle up to 17/64 in. (6 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.

CARRYING

HANDLE

SAW		LOCK
ARM		LOCK
ARM	RE	PIN
	I	PIN
	SN

0 15 30

15

45

0
15
22.5
30	31.62
	45

MITER LOCK

HANDLE

SAW ARM
LOCKED IN DOWN POSITION	Fig. 3

SWITCH

TRIGGER

SPINDLE

LOCK BUTTON

Fig. 4

SWITCH

TRIGGER

PADLOCK

Fig. 5

Page 10

Image 10

Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Compound Miter SAWProduct Specifications Table of ContentsIntroduction Rules for Safe Operation Symbol MeaningDouble Insulation Read ALL Instructions Before Making a CUT, be sure all adjustments are secure Glossary of Terms for Woodworking FreehandCombination Square UnpackingTools Needed Framing SquareWork Clamp Miter Lock Handle Loose Parts ListDust BAG Stop BlockCutting Capacities FeaturesKnow Your Compound Miter SAW AMP MotorSpindle Lock Button Carrying HandleMiter Lock Handle Trigger LockElectric Brake Positive Stops on Miter TableBevel Lock Knob Miter FenceDust BAG AssemblyDust Guide Work ClampClamp Bracket Bracket Screw Small Stop Block Table ExtensionsStop Block Wing Screw Extension Miter SAW BaseTo Install Blade Framing Square Miter Fence Miter Table Squaring the Miter Table to the FenceSee Figures 17 Miter Lock Handle View of Miter Table Square with FenceAdjustments Miter Fence Miter TableMiter Fence Squaring the SAW Blade to the FenceSee Figures 21 Blade Miter Framing Table SquareBlade Squaring the Blade to the Miter TableSee Figures 25 Combination Miter SquareCutting a Slot in the Zero Clearance Throat Plate Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment Depth StopCrosscutting OperationCutting with Your Compound Miter SAW To Crosscut with Your Miter SAWSee Figures 30 Bevel CUT Indicator PointBevel CUT Mounting BracketTo Make a Compound CUT with Your Miter SAW Compound Miter CUTCompound Miter CUT Long Workpiece Support Long WorkpiecesJamming the blade. See Figures 36 Workpiece SupportsCOMPOUND-ANGLE Settings for Popular Structures Cutting Compound MitersCutting Crown Molding Laying Molding Flat on the Miter TableRight Cutting Warped MaterialClamping Wide Workpieces WrongLubrication MaintenanceGeneral Extension CordsOperators Manual Ryobi TECHNOLOGIES, INC