Ryobi Understanding the Miter Saw Lock Handle and Features for Safe Usage
Page 10

FEATURES

BLADE WRENCH / STORAGE AREA

See Figure 2.

A blade wrench is packed with your saw. One end of the wrench is a phillips screwdriver and the other end is a 1/4 in. (6.4 mm) hex key. Use the hex key end when installing or removing blade and the phillips end when removing or loosening screws. A storage area for the blade wrench is located behind the fence.

CARRYING HANDLE

See Figure 3.

For convenience when carrying or transporting your miter saw from one place to another, a carrying handle has been provided on top of the saw arm as shown in figure 3. To transport, turn off and unplug your saw, then lower the saw arm and lock it in the down position. Lock saw arm by depressing the lock pin.

MITER LOCK HANDLE

See Figure 3.

The miter lock handle securely locks your saw at desired miter angles.

SPINDLE LOCK BUTTON

See Figure 4.

A spindle lock button has been provided for locking the spindle which keeps the blade in your saw from rotating. Depress and hold the lock button while installing, changing, or removing blade only.

CARRYING HANDLE

LOCK

PIN

SAW ARM

45

3 1 . 6 2

3

 

0

1

.

 

15

22.5

 

30

 

31.62

45

 

MITER LOCK

HANDLE

SAW ARM

 

LOCKED IN DOWN POSITION

Fig. 3

 

SWITCH TRIGGER

SPINDLE

LOCK

BUTTON

Fig. 4

SWITCH TRIGGER

PADLOCK

Fig. 5

TRIGGER LOCK

See Figure 5.

To prevent unauthorized use of your compound miter saw, we suggest that you disconnect it from the power supply and lock the switch in the off position. To lock the switch, install a padlock (not included) through the hole in the switch trigger. A lock with a long shackle up to 19/64 in. (7 mm) diameter may be used. When the lock is installed and locked, the switch is inoperable. Store the padlock key in another location.

Page 10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operators Manual Save this Manual for Future ReferenceProduct Specifications Table of ContentsIntroduction Rules for Safe Operation Symbol MeaningSafety and International Symbols Double InsulationRead ALL Instructions Blade Coasts After Being Turned OFF Glossary of Terms for Woodworking FreehandUnpacking Tools NeededLoose Parts List AMP Motor FeaturesKnow Your Compound Miter SAW Cutting CapacitiesMiter Lock Handle Blade Wrench / Storage AreaCarrying Handle Spindle Lock ButtonElectric Brake Positive Stops on Miter TableBevel Lock Knob Mounting HolesDust BAG AssemblyDust Guide Work ClampSee Figures 11, 12, Table ExtensionsStop Block See Figures 11To Install Blade See Figures 15Squaring the Miter Table to the Fence See Figures 17Squaring the SAW Blade to the Fence AdjustmentsSee Figures 20 Miter Fence Squaring the Blade to the Miter Table See Figures 25Operation Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment ApplicationsCrosscutting Cutting with Your Compound Miter SAWTo Crosscut with Your Miter SAW Bevel CUT See Figures 30Compound Miter CUT To Make a Compound CUT with Your Miter SAWSupport Long Workpieces Cutting Compound Miters Cutting Crown Molding Laying Molding Flat on the Miter TableClamping Wide Workpieces Cutting Warped MaterialSee Figures 36 Lubrication MaintenanceGeneral Extension CordsMm Compound Miter Saw Ryobi TECHNOLOGIES, INC

TS1351 specifications

The Ryobi TS1351 is a versatile and robust table saw designed to meet the needs of both DIY enthusiasts and professional woodworkers. Known for its impressive performance and user-friendly features, the TS1351 stands out in its category, making it an ideal choice for those looking to enhance their woodworking capabilities.

One of the key features of the Ryobi TS1351 is its powerful 15 Amp motor, which delivers ample cutting power for a variety of tasks. This motor enables users to cut through hardwoods, softwoods, and even engineered materials with ease. The saw offers a maximum cutting depth of 3-1/8 inches at 90 degrees, allowing for substantial cuts in thicker materials.

The TS1351 is equipped with a 10-inch carbide-tipped blade that provides a fine finish and extended blade life. The blade can be adjusted for height and angle, allowing for precise bevel cuts of up to 45 degrees. This versatility makes it possible to perform a wide range of cuts, including crosscuts, rip cuts, and miter cuts, making the saw suitable for diverse woodworking projects.

Safety is a priority with the Ryobi TS1351. It features a blade guard and an anti-kickback pawl, which help protect users during operation. The push stick, included with the saw, further enhances safety by allowing operators to make cuts without putting their hands near the blade. Additionally, the sturdy base offers stability, reducing vibrations and ensuring accurate cuts.

Another innovative characteristic of the TS1351 is its portability. Weighing in at just over 50 pounds, the saw is easy to transport, making it suitable for job sites or home workshops. The onboard storage for accessories also helps keep the workspace organized and reduces setup time.

The Ryobi TS1351 further enhances user experience with its quick-release guard, easy-to-read scales, and a large table surface that provides ample room for material support. Whether tackling small projects or larger builds, this table saw delivers reliable performance, precision, and safety, making it a valuable tool for any woodworker or craftsperson.
Top Page Image Contents