Ryobi TS1351 manual Adjustments, Squaring the SAW Blade to the Fence, See Figures 20

Page 16

ADJUSTMENTS

WARNING:

Failure to unplug your saw could result in accidental starting causing possible serious personal injury.

■Push down on the saw arm and pull out the lock pin to release the saw arm.

■Raise saw arm to its full raised position.

■Loosen the miter lock handle approximately one-half turn.

■Depress the miter lock plate and rotate the miter table until the pointer on the control arm is positioned at 0°.

■Release the miter lock plate and securely tighten the miter lock handle.

■Lay a framing square flat on the miter table. Place one leg of the square against the fence. Place the other leg of the square beside the zero clearance throat plate in the miter table. The edge of the square and the zero clearance throat plate in the miter table should be paral- lel as shown in figure 19.

■If the edge of the framing square and the zero clearance throat plate in the miter table are not parallel as shown in figures 18 and 19, adjustments are needed.

■Using the blade wrench provided, loosen the socket head screws securing the fence. See Figure 20. Adjust the fence left or right until the framing square and zero clearance throat plate are parallel.

■Retighten the screws securely and recheck the fence- to-table alignment.

SQUARING THE SAW BLADE TO THE FENCE

See Figures 20 - 24

■Unplug your saw.

WARNING:

Failure to unplug your saw could result in accidental starting causing possible serious personal injury.

■Pull the saw arm all the way down and engage the lock pin to hold the saw arm in transport position.

■Loosen the miter lock handle approximately one-half turn.

■Depress the miter lock plate and rotate the miter table until the pointer on the control arm is positioned at 0°.

■Release the miter lock plate and securely tighten the miter lock handle.

■Lay a framing square flat on the miter table. Place one leg of the square against the fence. Slide the other leg of the square against the flat part of saw blade.

Note: Make sure that the square contacts the flat part of the saw blade, not the blade teeth.

MITER FENCE

MITER TABLE

FRAMING

ZERO CLEARANCE

SQUARE

THROAT PLATE

VIEW OF MITER TABLE NOT SQUARE WITH

FENCE, ADJUSTMENTS ARE REQUIRED

Fig. 18

MITER

FENCE

MITER TABLE

FRAMING

ZERO CLEARANCE

SQUARE

THROAT PLATE

VIEW OF MITER TABLE NOT SQUARE WITH

FENCE, ADJUSTMENTS ARE REQUIRED

Fig. 19

SOCKET HEAD

 

SOCKET HEAD

SCREW(S)

 

SCREW(S)

 

 

 

FENCE

 

 

 

 

45

 

 

 

4

5

 

 

 

 

 

3

 

 

 

.6

 

1.6

30

 

3

31

 

 

22.5

 

0

 

 

 

 

22.5

 

 

 

15

0

15

 

 

 

 

 

 

 

Fig. 20

Page 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Operators Manual Save this Manual for Future ReferenceProduct Specifications Table of ContentsIntroduction Symbol Meaning Safety and International SymbolsRules for Safe Operation Double InsulationRead ALL Instructions Blade Coasts After Being Turned OFF Glossary of Terms for Woodworking FreehandUnpacking Tools NeededLoose Parts List Features Know Your Compound Miter SAWAMP Motor Cutting CapacitiesBlade Wrench / Storage Area Carrying HandleMiter Lock Handle Spindle Lock ButtonPositive Stops on Miter Table Bevel Lock KnobElectric Brake Mounting HolesAssembly Dust GuideDust BAG Work ClampTable Extensions Stop BlockSee Figures 11, 12, See Figures 11To Install Blade See Figures 15Squaring the Miter Table to the Fence See Figures 17Squaring the SAW Blade to the Fence AdjustmentsSee Figures 20 Miter Fence Squaring the Blade to the Miter Table See Figures 25Pivot Adjustments Travel Pivot Adjustment Bevel Pivot AdjustmentOperation ApplicationsCrosscutting Cutting with Your Compound Miter SAWTo Crosscut with Your Miter SAW Bevel CUT See Figures 30Compound Miter CUT To Make a Compound CUT with Your Miter SAWSupport Long Workpieces Cutting Compound Miters Cutting Crown Molding Laying Molding Flat on the Miter TableClamping Wide Workpieces Cutting Warped MaterialSee Figures 36 Maintenance GeneralLubrication Extension CordsMm Compound Miter Saw Ryobi TECHNOLOGIES, INC

TS1351 specifications

The Ryobi TS1351 is a versatile and robust table saw designed to meet the needs of both DIY enthusiasts and professional woodworkers. Known for its impressive performance and user-friendly features, the TS1351 stands out in its category, making it an ideal choice for those looking to enhance their woodworking capabilities.

One of the key features of the Ryobi TS1351 is its powerful 15 Amp motor, which delivers ample cutting power for a variety of tasks. This motor enables users to cut through hardwoods, softwoods, and even engineered materials with ease. The saw offers a maximum cutting depth of 3-1/8 inches at 90 degrees, allowing for substantial cuts in thicker materials.

The TS1351 is equipped with a 10-inch carbide-tipped blade that provides a fine finish and extended blade life. The blade can be adjusted for height and angle, allowing for precise bevel cuts of up to 45 degrees. This versatility makes it possible to perform a wide range of cuts, including crosscuts, rip cuts, and miter cuts, making the saw suitable for diverse woodworking projects.

Safety is a priority with the Ryobi TS1351. It features a blade guard and an anti-kickback pawl, which help protect users during operation. The push stick, included with the saw, further enhances safety by allowing operators to make cuts without putting their hands near the blade. Additionally, the sturdy base offers stability, reducing vibrations and ensuring accurate cuts.

Another innovative characteristic of the TS1351 is its portability. Weighing in at just over 50 pounds, the saw is easy to transport, making it suitable for job sites or home workshops. The onboard storage for accessories also helps keep the workspace organized and reduces setup time.

The Ryobi TS1351 further enhances user experience with its quick-release guard, easy-to-read scales, and a large table surface that provides ample room for material support. Whether tackling small projects or larger builds, this table saw delivers reliable performance, precision, and safety, making it a valuable tool for any woodworker or craftsperson.
Top Page Image Contents