Ryobi TS1351 manual To Install Blade, See Figures 15

Page 14

ASSEMBLY

TO INSTALL BLADE

See Figures 15 and 16.

WARNING:

A 10 in. (254 mm) blade is the maximum blade capacity of your saw. Never use a blade that is too thick to allow outer blade washer to engage with the flats on the spindle. Larger blades will come in contact with the blade guards, while thicker blades will prevent the blade bolt from securing the blade on the spindle. Either of these situa- tions could result in a serious accident and can cause serious personal injury.

■Unplug your saw.

WARNING:

Failure to unplug your saw could result in accidental starting causing possible serious personal injury.

■Raise saw arm.

■Loosen screw A on the blade bolt cover.

■Rotate lower blade guard up and remove screw B. Ro- tate blade bolt cover up and back to expose the blade bolt. See figure 16.

■Depress the spindle lock button and rotate the blade bolt until the spindle locks.

■Using the wrench provided, loosen and remove the blade bolt. See figure 15.

NOTE: The blade bolt has left hand threads. Turn blade bolt clockwise to loosen.

■Remove outer blade washer. Do not remove inner blade washer.

■Wipe a drop of oil onto inner blade washer and outer blade washer where they contact the blade.

WARNING:

If inner blade washer has been removed, replace it before placing blade on spindle. Failure to do so could cause an accident since blade will not tighten properly.

■Fit saw blade inside lower blade guard and onto spindle. The blade teeth point downward at the front of saw as shown in figure 16.

■Replace outer blade washer. The double "D" flats on the blade washers align with the flats on the spindle.

■Depress spindle lock button and replace blade bolt.

Note: The blade bolt has left hand threads. Turn blade bolt counterclockwise to tighten.

SPINDLE LOCK

BUTTON

Fig. 15

SCREW A

SCREW B

BLADE

BOLT

COVER

LOWER

BLADE GUARD

TO

INNER BLADE

WASHER WITH

LOOSEN

DOUBLE "D" FLATS

 

 

FLAT (S)

TO

ON SPINDLE

TIGHTEN

 

BLADE

BLADE BOLT

OUTER BLADE WASHER

WITH DOUBLE "D" FLATS

Fig. 16

Page 14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operators Manual Save this Manual for Future ReferenceIntroduction Table of ContentsProduct Specifications Rules for Safe Operation Symbol MeaningSafety and International Symbols Double InsulationRead ALL Instructions Blade Coasts After Being Turned OFF Glossary of Terms for Woodworking FreehandUnpacking Tools NeededLoose Parts List AMP Motor FeaturesKnow Your Compound Miter SAW Cutting CapacitiesMiter Lock Handle Blade Wrench / Storage AreaCarrying Handle Spindle Lock ButtonElectric Brake Positive Stops on Miter TableBevel Lock Knob Mounting HolesDust BAG AssemblyDust Guide Work ClampSee Figures 11, 12, Table ExtensionsStop Block See Figures 11To Install Blade See Figures 15Squaring the Miter Table to the Fence See Figures 17See Figures 20 AdjustmentsSquaring the SAW Blade to the Fence Miter Fence Squaring the Blade to the Miter Table See Figures 25Operation Pivot Adjustments Travel Pivot AdjustmentBevel Pivot Adjustment ApplicationsTo Crosscut with Your Miter SAW Cutting with Your Compound Miter SAWCrosscutting Bevel CUT See Figures 30Compound Miter CUT To Make a Compound CUT with Your Miter SAWSupport Long Workpieces Cutting Compound Miters Cutting Crown Molding Laying Molding Flat on the Miter TableSee Figures 36 Cutting Warped MaterialClamping Wide Workpieces Lubrication MaintenanceGeneral Extension CordsMm Compound Miter Saw Ryobi TECHNOLOGIES, INC

TS1351 specifications

The Ryobi TS1351 is a versatile and robust table saw designed to meet the needs of both DIY enthusiasts and professional woodworkers. Known for its impressive performance and user-friendly features, the TS1351 stands out in its category, making it an ideal choice for those looking to enhance their woodworking capabilities.

One of the key features of the Ryobi TS1351 is its powerful 15 Amp motor, which delivers ample cutting power for a variety of tasks. This motor enables users to cut through hardwoods, softwoods, and even engineered materials with ease. The saw offers a maximum cutting depth of 3-1/8 inches at 90 degrees, allowing for substantial cuts in thicker materials.

The TS1351 is equipped with a 10-inch carbide-tipped blade that provides a fine finish and extended blade life. The blade can be adjusted for height and angle, allowing for precise bevel cuts of up to 45 degrees. This versatility makes it possible to perform a wide range of cuts, including crosscuts, rip cuts, and miter cuts, making the saw suitable for diverse woodworking projects.

Safety is a priority with the Ryobi TS1351. It features a blade guard and an anti-kickback pawl, which help protect users during operation. The push stick, included with the saw, further enhances safety by allowing operators to make cuts without putting their hands near the blade. Additionally, the sturdy base offers stability, reducing vibrations and ensuring accurate cuts.

Another innovative characteristic of the TS1351 is its portability. Weighing in at just over 50 pounds, the saw is easy to transport, making it suitable for job sites or home workshops. The onboard storage for accessories also helps keep the workspace organized and reduces setup time.

The Ryobi TS1351 further enhances user experience with its quick-release guard, easy-to-read scales, and a large table surface that provides ample room for material support. Whether tackling small projects or larger builds, this table saw delivers reliable performance, precision, and safety, making it a valuable tool for any woodworker or craftsperson.
Top Page Image Contents