Multiquip manual MRH-800DS-VIBRATION Roller Components

MRH-800DS—VIBRATION ROLLER COMPONENTS

Figure 3 illustrates the location of the major components for the MRH-800DS Vibration Roller. The function of each component is described below:

1. Fuel Tank/Cap – Fill with diesel fuel. Fuel tank holds approximately 2 gallons (7.5 liters). DO NOT top off fuel. Wipe up any spilled fuel immediately.

2.Center Cover – When opened and supported by strut, provides access to oil pump and filter, battery, V-belt, and clutch box.

3.Vibration Rollers – 25-inch wide steel drums that provide compaction force in the compaction and patching of asphalt type surfaces.

4.Front Headlights – Activate using switch on control handle. Use to illuminate ground durring nighttime or low light operating conditions.

5.Hydraulic Oil Gauge – Indicates the hydraulic oil level.

6.Oil Tank – Fill with proper grade of hydraulic oil.

7. Vibrator Oil Level Plug – Remove to check vibrator oil level.

8.Lifting Hook – Used to lift the machine with crane or other lifting device.

9.Engine – This machine uses the Yanmar L100A engine. Refer to the engine Owner’s Manual for more information.

10.WaterTank– Holds 10.57 gallons (40 liters) for the sprinkler system.

11.Parking Brake – Makes sure machine will not accidentally move when parked or not in use.

MQ-MIKASA MRH-800DS VIBRATION ROLLER — PARTS & OPERATION MANUAL — REV. #3 (02/02/05) — PAGE 17