MRH-800DS— ENGINE COMPONENTS
Figure 5. MVH-402DSB Engine Components
ENGINE COMPONENTS
Figure 5 illustrates the location of the major engine components of the machine. Each component is described below:
1. Fuel Filler Cap – Remove this cap to add unleaded gasoline to the fuel tank. Make sure cap is tighten securely.
| DO NOT over fill. |
2. | FuelTank – Diesel engine holds 5.8 quarts of diesel fuel. |
3. | Air Cleaner – Prevents dirt and other debris from entering |
| the fuel system. Remove |
| cannister to gain access to filter element. |
4. | Muffler – Used to reduce noise and emissions. |
5. | Recoil Starter (pull rope) |
| Alternate type would be electric start (ignition key). |
6.Recoil Starter – Housing for pull rope and starter.
7. Oil Filler Cap/Dipstick – Remove this cap to add oil to the oil tank. Use dipstick to check oil level.
8.Oil Drain Plug – Unscrew plug to drain oil from engine crankcase. Dispose of oil in a safe manner.
9. Decompression Lever – Press down before starting engine.To prevent damage to the engine, DO NOT use for any other purpose.
10. Fuel Cock – Controls the flow of diesel fuel to the engine. Must be in the ON position when starting and running the engine.
PAGE 20 —