MRH-800DS—MAINTENANCE
FORWARD AND REVERSE TRAVEL ADJUSTMENT
1.If neutral position for forward and reverse travel has been displaced, conduct the neutral adjustment.
2.If roller travels forward with the ball of ball plunger remaining in V slot of the guide, loosen M8 bolt and slide the slide plate slightly toward the engine. If the roller travels backward, slide the plate towards side plate (Figure 28).
Plunger |
| Guide |
|
Slide Plate
M8 Bolt
Figure 28. Adjustment of Neutral Position
3.With M8 bolt tightened, start engine and check the neutral for forward and reverse. If still displaced, repeat the procedure.
4.If neutral position of forward/reverse lever has been displaced, use the turn buckle located on the oil pump side of forward/reverse cable.