Hitachi NB616X instruction manual Motor

Chapter 5 SETTING

5.3 Items regarding the feed back board of the inverter main body

								Setting	Change
Code			Function name		Setting range		Initial data		mode on
								on run	run
A044	1st		control method		00(VC) / 01(VP1.7power) / 02(Free V/f Setting)		00	-	-
					/ 03(SLV) / 04(0Hz area SLV) / 05(V2)
H001	Auto-tuning			mode	00(NOR : Invalid) / 01(NRT : not rotate)/ 02(AUT :		00	-	-
	selection				rotate)
H002	1st		motor	constant	00(Hitachi standard motor constant)/		00	-	-
	selection				01(Auto-tuning data)/
					02(Auto tuning data with online auto-tuning)
H003	1st		motor	capacity	0.20 - 75.0(kW)		Setting on	-	-
	selection						forwarding
H004	1st		motor	pole	2/4/6/8 (Poles)		4	-	-
	selection
H005	1st		motor	speed	0.001 - 9.999 / 10.00 - 65.53		1.590
	response setting
H006	1st		stabilized factor		0. - 255.		100.
	1st motor R1 setting						depends on
H020					0.000 - 9.999 / 10.00 - 65.53(Ω	)	the motor	-	-
							capacity
	1st motor R2 setting						depends on
H021					0.000 - 9.999 / 10.00 - 65.53(Ω	)	the motor	-	-
							capacity
	1st motor L setting						depends on
H022					0.00 - 99.99 / 100.0 - 655.35(mH)		the motor	-	-
							capacity
	1st motor I0 setting						depends on
H023					0.00 - 99.99 / 100.0 - 655.35(A)		the motor	-	-
							capacity
H024	1	st	motor J setting		0.000 - 9.999 / 10.00 - 99.99 /		depends on
							the motor	-	-
					100.0 - 9999.(kgm2)
							capacity
H030	1st		motor R1 setting		0.000 - 9.999 / 10.00 - 65.53(Ω	)	depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H031	1st		motor R2 setting		0.000 - 9.999 / 10.00 - 65.53(Ω	)	depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H032	1st		motor L setting		0.00 - 99.99 / 100.0 - 655.35(mH)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity
H033	1st		motor I0setting		0.00 - 99.99 / 100.0 - 655.35(A)		depends on	-	-
	(Auto-tuning data)						the motor
							capacity

15