VIII. Filter Assembly

External 62” Filter Assembly

*Silencer Included.

1.Attach cartridge with hardware provided making sure gasket is attached. See Fig. 1

2.If Filter requires additional support. Use the plate at the top of the filter to support the filter assembly.

Note: If filter cartridge is located away from the cyclone and motor, additional square-to-round connectors and pipe can be purchased.

Fig. 1	Gasket
	Material
(7) 3/8” x 1” Bolts
(14) Washers
(7) Serrated Nuts

For Filter cleaning instructions, see pg. 11.

Filter

Clamp

Silencer

Filter

Dust Bin

No Filter Assembly

1.Exhaust air to exterior of building. Mount directly at the hole in exterior wall or use a square-to-round transition and ductwork to vent air to exterior.

Option -

* Exhaust Diverter - Can be used either up or down

* Only usable on No Filter.

Note: Do not return exhaust air to the shop unless filter media is added.

Caution:

If exhaust air is vented outside you must provide make up / return air.

Flue gases (carbon monoxide) can be drawn into the shop from furnaces, water heaters or other appliances.

Caution: Rotating blades! Keep hands clear. Keep people away from exhaust.

Pro 2000 Owner’s Manual c O.A.S. 2007