XI. Directions for Cleaning External Filter
All steps should be done with a dust mask and eye protection.
The External Filter can be cleaned using the following methods:
1. Compressed air from outside.
Blast air along pleats of the filter at about a 20 |
|
angle. Blast air out and away from you or anyone |
|
in the general area. |
|
Keep air nozzle at least 6” from filter. Closer | 6” |
blasts may damage filter material. |
Filter must be cleaned regularly or filter damage may result. If gauge reaches 3, it is time to clean your filter. Never allow gauge to reach 5. You could destroy your filter. See page 11.
2. Empty Dust Bin.
Wait a few minutes for internal dust to settle then unclip and carefully empty dust bin.
3. Rinse with water. (Optional)
Keep nozzle at least 6” from filter and keep your pressure down. Closer blasts may damage filter material. Rinse off INSIDE of filter. Let filter dry completely before reuse or keep a spare filter on hand.
12
Pro 2000 Owner’s Manual c O.A.S. 2007