Collector Body | Outlet |
The collector body includes the fan assembly, switch, and motor which are preassembled at the factory. Set the collector body on top of the base plate so the intake portion is near the edge of the base plate and the bolt holes are lined up as shown in Figure 3. Secure the collector body to the base plate with four (4)
Figure 3. Mounting collector to base.
The outlet can now be attached to the main col- lector body. Insert the rubber gasket between the collector and lower outlet flange and secure using eight (8) 5⁄16"-18 x 1⁄2" hex bolts provided.
See Figure 4.
Figure 4. Mounting outlet to collector body.
G1028Z/G1029 Dust Collector |