Unpacking, Piece Inventory | Grizzly G1028Z/G1029 manual

Unpacking

The Model G1028Z/G1029 Dust Collector is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

The G1028Z/G1029 is a heavy machine, 116/140 lbs. shipping weight. DO NOT over-exert yourself while unpack- ing or moving your machine – you will need assistance. Serious per- sonal injury may occur if safe moving methods are not followed.

Some metal parts may have sharp edges on them after they are formed. Please examine the edges of all metal parts before handling them. Failure to do so could result in injury.

Piece Inventory

After all the parts have been removed from the carton, you should have:

•Collector Body Assembly

•Base

•“Y” Inlet

•Collection/Filter Bags

•Lower Support Brackets (2)

•Casters (4)

•Rubber Gasket

•Upper Support Bracket

•Outlet

•Outlet Hose

•Hose Clamps

•Hex Bolts 5⁄16"-18 x 1⁄2" (36)

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.

NOTICE

A full parts list and breakdown can be found toward the end of this manual. For easier assembly, or to identify missing parts, please refer to the detailed illustrations at the end of the manual.

-8-	G1028Z/G1029 Dust Collector