Warranty | 2 | |
Safety | Rules | 2 |
Unpacking | 3 | |
Assembly | ||
Installation | 5 | |
Operation | 6 | |
Maintenance | 6 | |
Troubleshooting | 7 | |
Parts | Illustration and List | |
Espa_ol | ||
workmanship within one year from the date of purchase CALL
1-800-4-MY-HOME® TO ARRANGE FOR FREE REPAIR.
If this tool is used for commercial or rental purposes, this war- ranty will apply for only ninety days from the date of purchase.
This warranty applies only while this tool is in the United States.
This warranty gives you specific legal rights and you may also have other rights, which vary, from state to state.
Sears, Roebuck and Co., Dept. 817WA, Hoffman Estates, IL 60179
,,Do not use power tools in dangerous environments. Do not use power tools in damp or wet locations. Do not expose power tools to rain.
•Work area should be properly lighted.
•Proper electrical receptacle should be available for tool. Three prong plug should be plugged directly into properly grounded,
•Extension cords should have a grounding prong and the three wires of the extension cord should be of the correct
gauge.
•Keep visitors at a safe distance from work area.
•Keep children out of workplace. Make workshop childproof. Use padlocks, master switches or remove switch keys to pre- vent any unintentional use of power tools.
TOOL SHOULD BE MAINTAINED
•Always unplug tool prior to inspection.
,,Consult manual for specific maintaining and adjusting procedures.
•Keep tool lubricated and clean for safest operation.
,,Remove adjusting tools. Form habit of checking to see that adjusting tools are removed before switching machine on.
•Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform their intended function.
•Check for damaged parts. Check for alignment of moving parts, binding, breakage, mounting and any other condi- tion that may affect a tool's operation.
•A guard or other part that is damaged should be properly repaired or replaced. Do not perform makeshift repairs.
(Use parts list provided to order replacement parts.)
DANGER: Do not use this dust collector in a flammable or
explosive atmosphere. Do not use to collect metal shavings or
dust. Consult National Fire Protection Association (NFPA) standards before setting up a dust collection system, espe- cially NFPA 664.
WARNING: For your own safety read all of the instructions and precautions before operating tool.
CAUTION: Always follow proper operating procedures as defined in this manual even if you are familiar with use of this or similar tools. Remember that being careless for even a fraction of a second can result in severe personal injury.
BE PREPARED FOR JOB
•Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets or other jewelry which may get caught in moving parts of machine.
,,Wear protective hair covering to contain long hair.
,,Wear safety shoes with
,,Wear safety glasses complying with United States ANSI Z87.1. Everyday glasses have only impact resistant lens- es. They are NOT safety glasses.
,,Wear face mask or dust mask if operation is dusty.
,,Be alert and think clearly. Never operate power tools when tired, intoxicated or when taking medications that cause drowsiness.
PREPARE WORK AREA FOR JOB
,,Keep work area clean. Cluttered work areas invite accidents.
© Sears, Roebuck and Co. | 2 |
|
KNOW HOW TO USE TOOL
•Use right tool for job. Do not force tool or attachment to do a job for which it was not designed.
•Disconnect tool when performing service or maintenance.
•Avoid accidental
•Do not force tool. It will work most efficiently at the rate for which it was designed.
•Leave hands free to operate machine. Protect hands from possible injury.
•Never leave tool running unattended. Turn the power off and do not leave tool until it comes to a complete stop.
•Do not overreach. Keep proper footing and balance.
•Never stand on tool. Serious injury could occur if tool is tipped or if blade is unintentionally contacted.
•Keep hands away from moving parts.
•Know your tool. Learn the tool's operation, application and specific limitations.
DANGER: The operation of any power tool can result in for- eign objects being thrown into the eyes, which can result in severe eye damage. Always wear safety glasses complying with United States ANSI Z87.1 (shown on package) before
commencing power tool operation.