DESCRIPTION
The Craftsman Dust Collector is designed to remove and col-
lect wood dust and wood chips from woodworking machinery.
Collector bag collects dust and chips, and makes disposal of dust and chips easy. Collector features 2_/2x 72" intake hose.
SPECIFICATIONS |
|
|
|
|
|
|
|
|
|
| |||||
Motor | Horsepower | (Max. | Developed) | ................. |
|
|
|
| 1 _t_ | ||||||
Voltage | ...................................... |
|
|
|
|
|
|
|
|
| 115 V | ||||
Amperes | ....................................... |
|
|
|
|
|
|
|
|
| 9.0 | ||||
Hertz | .......................................... |
|
|
|
|
|
|
|
|
|
|
| 60 | ||
Phase | ....................................... |
|
|
|
|
|
|
|
|
|
| Single | |||
RPM |
|
|
|
|
|
|
|
|
|
|
| 3450 | |||
Certification |
| ................................... |
|
|
|
|
|
|
| CSA | |||||
Air | Flow | Rate | .............................. |
|
|
|
|
| 150 | CFM | |||||
Air Velocity | ................................ |
|
|
|
|
|
| 4400 | FPM | ||||||
Maximum | Static | Pressure | ........... |
| 3.75" | of water | column | ||||||||
Sound | Level | ................................ |
|
|
|
|
|
| 76 dB | A | |||||
Inlet | .......................................... |
|
|
|
|
|
|
|
|
|
|
| 2I/Z | ||
Collector | Bag | Capacity | ................ |
| 36 | gal. | (4.9 | cu. ft.) | |||||||
Collector | Bag | Rating | ......................... |
|
|
|
| 1 micron | |||||||
Weight |
| ...................................... |
|
|
|
|
|
|
|
|
| 55 | Ibs | ||
Overall |
| Size |
|
|
|
|
| 173/4x | 19 | x 72" | |||||
DUST |
| COLLECTOR |
|
|
|
|
|
|
|
|
| ||||
DANGER:Do |
| not use this dust collector | in a | flammable | or |
| |||||||||
explosive | atmosphere. | Do | not use to | collect metal | shavings | or | |||||||||
dust | Consult | National | Fire | Protection | Association | (NFPA) |
| ||||||||
standards before setting up a dust collection system, espe- |
| ||||||||||||||
cially | NFPA | 664. |
|
|
|
|
|
|
|
|
|
| |||
•Connect collector hose to dust producing machine using hose clamp.
NOTE: For installations with more than one machine, it is rec- ommended that Craftsman 22313 Shop Dust Collection System be used for best performance.
NOTE: A longer hose may be used (maximum length is 40' of 2Yz" diameter hose). A larger diameter hose may be used, but length will be decreased.
•Turn dust collector on before starting dust producing machine.
EMPTYING COLLECTOR BAG
Refer to Figure 10.
DANGER:Turn switch off and remove plug from power source outlet before emptying collector bag.
•Empty collector bag by lifting bag clamp handle and releasing spring connector from latch. Slide bag away from collar. Dispose of dust properly.
•Mount collector bag by sliding bag over opening on collar. Position the spring connector into one of the slots on the latch and lock the clamp handle. Make sure collector bag is secure and rests flat on floor, so that floor supports the weight of wood dust and chips.
WARNING: Turn switch off and remove plug from power
source outlet before maintaining your dust collector. Refer to Figure 10.
•Clean motor of dust, chips or other particles. If operation is excessively dusty or dirty, frequent inspection of motor is required. Vacuum any particles that may have entered the motor.
•Replace worn, cut or damaged line cord.
•Replace worn or damaged collector hose.
•Replace worn or damaged collector bag.
•Clean or replace filter on a regular basis.
•Frequently check that all nuts, bolts, screws, etc. have not loosened due to collector vibration.
CLEANING | OR | REPLACING | FILTER |
DANGER: | Turn | switch off and | remove plug from power |
source outlet | before maintaining | your dust collector. | |
Refer to Figure 5, Page 4.
•Remove collector bag.
•Remove collar by pushing
•Reach into collector housing and pull down on loop at top of filter.
•Clean inside of filter using vacuum.
•Reinstall filter.
•Reinstall collector bag.
6