Alpha Tool.Com.HK Limited ECOGRDGR Grinding Applications, Surface Grinding, Wall Grinding

Page 11

GRINDING APPLICATIONS

SURFACE GRINDING

Securely connect the Flexible Connector Hose to the Dust Collection Cover. Turn Grinder and Vacuum on to start grinding application.

Use the Alpha® Rubber Hose Connector as a joint between duct and Flexible Connector Hose.

Flexible Connector Hose

Rubber Hose Connector	Duct
	Stainless Steel Hose Band

WALL GRINDING

Screw M4 x 10

1.Loosen the screws and remove the Sub Cover and Half Cover.

Half Cover

Sub Cover

11

Image 11

Contents Alpha Ecoguard Type G Dust Collection Cover Table of Contents Introduction About the SymbolsPrecautions for Using Dust Collection Cover Ecoguard Type G Overview AccessoriesInstalling the Connector Installing the Dust Collection CoverPlace in the other Connector Tighten the Screws Do not forget to insert Spring Washers Mounting the Grinding CUP Wheel to the Grinder Be careful to ensure the correct direction of the Lock Nut HSG-125 9565CV 9558NB G12S43 G13SE2 Wall Grinding Grinding ApplicationsSurface Grinding Attaching the Dust Collector Alpha Ecoguard Type G Schematic Ecoguard Type G Other Connectors and Spacers Drawing no Description Quantity Alpha Ecoguard Type G Parts ListBauer Drive, Oakland, NJ 07436 800-648-7229 Fax