INTRODUCTION
Thank you for purchasing the Alpha® Ecoguard Type G Dust Collection Cover. The Ecoguard Type G must be used with a vacuum, or other dust collection system. To ensure correct use, read this Instruction Manual and the Instruction Manual for the power tool and follow the operating instructions. Keep this manual in a place where operators can access it easily whenever necessary!
ABOUT THE SYMBOLS
According to the hazard level, all safety notes in this manual are classified into “DANGER”, “WARNING”, and “CAUTION”.
DANGER!
WARNING!
CAUTION!
Note: In some situations, failing to observe WARNING notes could result in death or serious personal injury. Be sure to read and observe the safety notes to ensure safety and correct use of the polisher.
PRECAUTIONS FOR USING DUST COLLECTION COVER
1.The Dust Collection Cover is for use with a 4.5” (115mm) and 5” (125mm)
2.The Dust Collection Cover is designed for grinding concrete, stone and other masonry products. Do not use when cutting metal or other materials.
3.The Dust Collection Cover is solely designed for use with a diamond cup wheel. Do not use with any other type of blade such as a grindstone or chip saw.
4.Always check the Dust Collection Cover for damage, cracks or deformation before starting work. Do not use the Dust Collection Cover if it is damaged, cracked or bent as this could cause to injury.
5.Always wear eye protection. Dust mask, nonskid safety shoes, hard hat, or hearing protection must be used for appropriate conditions.
6.Keep the Dust Collection Cover away from gasoline, thinner, petroleum and paraffin.
7.The supplied connector may not connect securely to every
3