Alpha Tool.Com.HK Limited ECOGRDGR Mounting the Grinding CUP Wheel to the Grinder

Page 8

CAUTION!

The Dust Collection Cover is solely designed for use with a grinding cup wheel. Do not use with any other type of blade, such as a cutoff or tip saw blades.

MOUNTING THE GRINDING CUP WHEEL TO THE GRINDER

WARNING!

Make sure the Ecoguard Type G is securely atttached to the grinder, otherwise it may come loose, causing injury.

1. Firmly hold Connector Assembly and tighten the screws.

Connector Assembly

8

Image 8
Contents Alpha Ecoguard Type G Dust Collection Cover Table of Contents Introduction About the SymbolsPrecautions for Using Dust Collection Cover Accessories Ecoguard Type G OverviewInstalling the Dust Collection Cover Installing the ConnectorPlace in the other Connector Tighten the Screws Do not forget to insert Spring Washers Mounting the Grinding CUP Wheel to the Grinder Be careful to ensure the correct direction of the Lock Nut HSG-125 9565CV 9558NB G12S43 G13SE2 Wall Grinding Grinding ApplicationsSurface Grinding Attaching the Dust Collector Alpha Ecoguard Type G Schematic Ecoguard Type G Other Connectors and Spacers Alpha Ecoguard Type G Parts List Drawing no Description QuantityBauer Drive, Oakland, NJ 07436 800-648-7229 Fax