Alpha Tool.Com.HK Limited ECOGRDGR instruction manual Attaching the Dust Collector

Page 12

2.Switch the position of the Sub Cover and Half Cover.

3.Tighten screws.

Sub Cover

Half Cover

ATTACHING THE DUST COLLECTOR

1.Securely connect Flexible Connector Hose to the duct of the grinder, then turn Grinder and Vacuum Cleaner on to start grinding application.

2.Use an adapter such as the Alpha® Rubber Hose Connector as a joint between the duct and the Flexible Hose Connector.

Rubber Hose Connector

Duct

Stainless Steel Hose Band

12

Image 12

Contents Alpha Ecoguard Type G Dust Collection Cover Table of Contents About the Symbols Precautions for Using Dust Collection CoverIntroduction Accessories Ecoguard Type G OverviewInstalling the Dust Collection Cover Installing the ConnectorPlace in the other Connector Tighten the Screws Do not forget to insert Spring Washers Mounting the Grinding CUP Wheel to the Grinder Be careful to ensure the correct direction of the Lock Nut HSG-125 9565CV 9558NB G12S43 G13SE2 Grinding Applications Surface GrindingWall Grinding Attaching the Dust Collector Alpha Ecoguard Type G Schematic Ecoguard Type G Other Connectors and Spacers Alpha Ecoguard Type G Parts List Drawing no Description QuantityBauer Drive, Oakland, NJ 07436 800-648-7229 Fax