Alpha Tool.Com.HK Limited ECOGRDGR instruction manual Place in the other Connector

Page 6

If the different Connector is needed, exchange the connector as per the following instructions.

1.Loosen the Screws.

2.Take the front of the Connector Assembly off.

Connector Assembly

(Front)

Ecoguard Type G

Screw

3.Loosen the Flat Head Screws using the Hex Wrench.

4.Take the back of the Connector Assembly off.

5.Replace with other Connector.

Flat Head Screw

Hex-Wrench

Connector Assembly

(back)

6. Place in the other Connector

6

Image 6
Contents Alpha Ecoguard Type G Dust Collection Cover Table of Contents About the Symbols Precautions for Using Dust Collection CoverIntroduction Accessories Ecoguard Type G OverviewInstalling the Dust Collection Cover Installing the ConnectorPlace in the other Connector Tighten the Screws Do not forget to insert Spring Washers Mounting the Grinding CUP Wheel to the Grinder Be careful to ensure the correct direction of the Lock Nut HSG-125 9565CV 9558NB G12S43 G13SE2 Grinding Applications Surface GrindingWall Grinding Attaching the Dust Collector Alpha Ecoguard Type G Schematic Ecoguard Type G Other Connectors and Spacers Alpha Ecoguard Type G Parts List Drawing no Description QuantityBauer Drive, Oakland, NJ 07436 800-648-7229 Fax