Craftsman 152.213351 FOROPERATORSAFETY,keepfingersandaliforeign, Connecting Tool to Power Source

FOROPERATORSAFETY,keepfingersandaliforeign

objectsoutoftheintakeports,Therotatingfaninside theMowerhousingisaccessibiethroughtheintake portsandishazardous,Donotwearboseciothingor

jeweiry,Makecertainthateachintakeportwhichisnot beingusedorattachedto a dustcollectionsystemis coveredwithan intakeportcap,

CONNECTING TOOL TO

POWER SOURCE

A separate eHectrbaHcircuit shouid be used for your toois, This circuit shouid not be Hessthan #14 A. W, G,

wire and shouid be protected with a 15-amp time Hag fuse, Have a qualified electrbian repair or repiace dam- aged or worn cord immediateiy, Before connecting the motor to the power iine, make certain the switch is in the "OFF" position and be sure that the electric current is of the same characteristics as stamped on the motor namepiate, AHHiine connections shouid make good con- tact, Running on Howvoitage wili damage the motor,

DO NOT EXPOSE THE DUST COLLECTOR TO RAIN OR OPERATE THE MACHINE IN DAMP LOCATIONS.

LOCKING SWITCH JN THE "OFF" POSiTiON

When the Dust Collector is not in use, the switch key

(B)shouid be removed so that it cannot be started, Grasp the switch key and puli it out of the switch assembiy, With the switch key removed, the switch wili not operate, However, shouid the switch key be removed while the dust collector is running, it can be turned "OFF", but cannot be restarted without inserting the switch key, See figure 18,

TRANSPORTATION AND STORAGE

MAKE CERTAmN THE DUST COLLECTOR ms DmSCONNECTED FROM THE POWER SOURCE.

Fig. 19

ON/OFF SWITCH

Fig. 18 A

/

__'_"A

1.The dust collector features a convenient carG,ing handle with rubber grip (A). Bee figure 19.

Fig. 20

\

The ON/OFF switch assembiy is iocated on the side of the motor, To turn the dust collector "ON", move the switch (A) up to the "ON" position, To turn the dust collector "OFF", move the same switch down to the "OFF" position, See figure 18,

2.in addition to the carrying handle, the dust collector features storage mounting hob (B). Bee figure 20.

IMPORTANT: The dust collector weighs approximately 46 Ibs. Care should be taken when lifting and transport- ing dust collector. Remove collection bag before lifting to reduce tripping hazard.

14