Harbor Freight Tools 6852 operating instructions Belt & 9 Sander

Page 1

6” BELT & 9” SANDER

6852

ASSEMBLY AND OPERATING INSTRUCTIONS

Visit our website at: http://www.harborfreight.com

Read this material before using this product. Failure to do so can result in serious injury. Save this manual.

Copyright© 2004 by Harbor Freight Tools®. All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual product may differ slightly from the product described herein. Tools required for assembly and service may not be included.

For technical questions or replacement parts, please call 1-800-444-3353.

Revised Manual 09k

Image 1

Contents Belt & 9 Sander General Safety Warnings and Precautions Product SpecificationsSave this Manual Industrial Applications Must Follow Osha Requirements Specific Product Warnings and Precautions California Health & Safety Code § 25249.5, et seq Unpacking Product FeaturesTo Assemble The Stands, Frames, And Upper Bracket Assembly InstructionsFigure D To Attach The Base To The Upper BracketFigure E To Assemble The Pulleys, Sanding Disc Plate, and TableOperating Instructions To Install a Sanding BeltFigure H To Install a Sanding DiscTo Adjust The Angle Of The Miter Gauge To Adjust The Angle Of The TableTo Adjust The Position Of The Table To Adjust The Sand Belt Frame For Vertical SandingTo Perform Horizontal Sanding With The Sanding Belt Figure MTo Perform Vertical Sanding With The Sanding Belt To Perform Horizontal Sanding With The Sanding DiscPlease Read the Following Carefully INSPECTION, MAINTENANCE, and CleaningDescription QTY Parts ListAssembly Diagram Limited 1 year / 90 Day warranty