SPECIFIC PRODUCT WARNINGS AND PRECAUTIONS
1.MAINTAIN A SAFE WORKING ENVIRONMENT. Keep the work area well lit. Make sure there is adequate surrounding workspace. Always keep the work area free of obstructions, sawdust, grease, oil, trash, and other debris. Do not use the Belt/Disc Sander in areas near flammable chemicals, dusts, and vapors. Do not use the Belt/Disc Sander in a damp or wet location.
2.GROUND THIS PRODUCT. The electrical Power Cord (55) for this product is equipped with a grounded,
3.DO NOT ABUSE THE POWER CORD. Do not use the Power Cord (55) to pull its
4.IF AN EXTENSION CORD (not included) IS USED, MAKE SURE TO USE ONLY UL APPROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. This product requires a 14 gauge extension cord.
5.REDUCE THE RISK OF ACCIDENTAL STARTING. Make sure the Power Switch
(53)is in the “OFF” position before plugging the Power Cord (55) into a grounded,
6.PRIOR TO STARTING THE BELT/DISC SANDER, MAKE SURE ALL ADJUST- ING KEYS AND WRENCHES ARE REMOVED FROM THE TOOL.
7.BEFORE SANDING, TURN ON THE BELT/DISC SANDER AND CHECK FOR EXCESSIVELY LOOSE SANDING BELT/DISC (2, 15) OR MACHINE VIBRA- TION. If this is found, turn off the tool and correct the problem before using.
8.ALWAYS KEEP HANDS AND FINGERS AS FAR AWAY AS POSSIBLE FROM THE MOVING PARTS OF THE BELT/DISC SANDER.
SKU 06852 | For technical questions, please call | PAGE 4 |