Heath Zenith 4162 warranty Operation, Features, Requirements

Motion Sensing Coach Lights

Features

•Light comes on when motion is detected.

•Automatically turns light off.

•Photocell keeps the light off during daylight hours.

This package includes:

Carriage Light or Lantern or Coach Light

Mounting screws

Requirements

•The light control requires 120 volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some electrical codes require installa- tion by a qualified electrician.

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 10 Min		x
Manual	To Dawn*		x

* resets to Auto Mode at dawn.

NOTE: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Set the ON-TIME switch	ON-TIME
on the bottom of the cover
plate to TEST.
	TEST 1 5 10 MIN
AUTO
Set ON-TIME switch to		ON-TIME

1, 5, or 10 minutes. TEST 1 5 10 MIN

MANUAL MODE

and wire connectors

* Model 4162 includes

additional top assembly parts.

Tail Assembly

(Lantern & Coach)*

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1Second OFF then...

Before installation,record the model number from back of fixture below. Attach receipt in case of possible warranty issues.

... back on.

© 2007 HeathCo LLC 595-5530-13