Design LED 12 Brick II ™
CAUTION!
Be sure all electrical connections are performed by a qualified electrician before attempting any operation.
Clamp Mounting
The Design LED 12 Brick II ™ provides a unique mounting bracket assembly that allows the unit to stand on flat surface, hang on truss via a clamp, or be used in cluster allow multiple units to rigged together (see the illustration below). Regardless of the mounting option you choose please refer to the safety guidelines in this manual to avoid damage to the unit and/or injury to persons.
When mounting this fixture to truss be sure to secure an appropriately rated clamp to the hanging yoke using a M10 screw fitted through the center hole of the hanging yoke. As an added safety measure be sure to attach at least one properly rated safety cable to the fixture. See illustration below.
©Elation Professional, Los Angeles Ca. | 13 | www.ElationLighting.com |