Design LED 12 Brick II ™
2. SAFETY INSTRUCTIONS
To guarantee proper and consistent operation, it is important to follow the guidelines in this manual. Elation Professional will not accept responsibility for damages resulting from the misuse of this fixture due to the disregard of the information printed in this manual.
1.Always be sure that the fan and the air inlets remain clean and are never blocked. Allow about 6” (15cm) between this fixture and other devices or a wall to allow for proper cooling.
2.Never touch the fixture during normal operation.
3.Never look directly into the lamp beam. You risk injury to your retina, which may induce blindness.
4.For safe operation, follow the Installation guide described in chapter two of this manual. Operating the Design LED 12 Brick II ™ without suited safety aids such as safety cables or clamps can increase the risk of damage and/or personal injury.
5.Installation should only be performed by qualified and certified personal.
6.When mounting this fixture, use only the original rigging points included with this fixture. Any structural modification will void the original manufactures warranty and may increase the risk of damage and/or personal injury.
7.To reduce the risk of fire or shock, do not expose this fixture to rain or moisture.
8.Do not attempt to operate this fixture if the power cord has become damaged or frayed.
9.Never open this fixture while in use.
10.This device falls under
11.All electrical connections must performed by qualified personal.
12.Be sure the available voltage matches the voltage requirements of the unit. Be
©Elation Professional, Los Angeles Ca. | 4 | www.ElationLighting.com |