Elation Professional 12 Brick II manual Controller, DMX-512 connection with DMX terminator

Page 17

Design LED 12 Brick II ™

4™ or DMX Branch/4™.

CONTROLLER

Please note: to ensure maximal stability, only two devices may be connected together in this manner! From the third devices, please connect to power supply to get power for the second link.

DMX-512 connection with DMX terminator

When longer runs of cable are used, you may need to use a terminator on the last fixture to avoid erratic behavior. A terminator is a 120 ohm 1/4 watt resistor that is connected between pins 2 and 3 of a male XLR connector (DATA + and DATA -). This fixture is inserted in the female XLR connector of the last fixture in your daisy chain to terminate the line. Using a cable terminator (Elation part number Z-DMX/T) will decrease the possibilities of erratic behavior.

©Elation Professional, Los Angeles Ca.

16

www.ElationLighting.com

Image 17

Contents Design LED 12 Brick Table of Contens ContentsGeneral Information Rain or moisture Never open this fixture while in use Safety InstructionsDesign LED 12 Brick Features General Guidelines Fixture Overview Design LED 12 Brick Design LED 12 Brick Mounting points Mounting and InstallationBelow MountingDesign LED 12 Brick Securing the Design LED 12 Brick DMX-512 control connection Understanding DMXDMX-512 connection with DMX terminator ControllerUnderstanding Fixture DMX addressing Operating Modes SpecificationLED Control model Internal Strobe Dimmer/Speed：Display menu： Remark DMX Operation Notes DMX Channel Traits Channel 4 General dimming Cleaning and Maintenance Year Limited Warranty Design LED 12 Brick Photometric Data Beam angleDesign LED 12 Brick Circuit Schematic Technical Specifications Design LED 12 Brick