Design LED 12 Brick II ™
10. CLEANING AND MAINTENANCE
The consider the following point during normal service and inspection:
1.Be sure all screws and fasteners are securely tightened at all times. Lose screws may fall out during normal operation resulting in damage or injury as larger parts could fall.
2.Electric power supply cables must not show any damage, material fatigue or sediments. Never remove the ground prong from the power cable.
Further instructions depending on the installation spot and usage have to be adhered by a skilled installer and any safety problems have to be removed.
Disconnect from mains before starting maintenance operation.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth. Never use alcohol or solvents.
There are no user serviceable parts inside this, please refer all other service issues to an authorized Elation service technician.
Should you need any spare parts, please order genuine parts from your local dealer.
©Elation Professional, Los Angeles Ca. | 24 | www.ElationLighting.com |