Revolabs 10-FLX2-002-POTS manual Microphone, Speaker, or Dialer not paired with Base Station

Page 49

Dialer Link Lost

If the FLX Dialer loses connection to the FLX2 Base Station it will display a „connection lost‟ notification on the screen and starts emitting a warning sound. The Dialer should be moved back into range of the Base Station at which point it will reconnect automatically.

Base Power Lost

If the FLX2 Base Station loses power, it will disconnect all telephone calls, analog audio inputs/outputs and will disconnect from the FLX Dialer, Speaker, and Microphones. Check to make sure that the power adapter is still connected to the FLX2 Base Station. Once the FLX2 Base Station is powered back on, the Dialer, Speaker and Microphones will reconnect automatically.

Microphone, Speaker, or Dialer not connecting to Base Station

If any of the components of the FLX2 Conference Phone indicate that they are searching for the Base Station, or lost the connection to the Base Station, please follow these steps:

1.Is the Base Station powered up – the Status LED on the back of the Base Station should have green double flashes about every second. If not, please power up the Base Station. All components should automatically connect to the Base Station after a few seconds.

2.The Base Station is powered up, but the Status LED indicates a fault by missing every fifth green double flash. Power down and power up the Base Station. All components should reconnect to the Base Station after a few seconds. If the fault in the Base Station continues (every fifth double flash is skipped) please contact Revolabs support.

3.Are the Dialer, Microphone, and Speaker out of reach of the Base Station? Please bring the components closer to the Base Station to see whether this resolves the issue.

4.Power down the Base Station, the Microphones, the Dialer, and the Speaker. Now power up the Base Station. Once the Base Station is powered up (double green flashes of the Status LED), power up the Dialer, and then the Microphones and the Speaker. The components should now connect to the Base Station.

5.If the components still do not connect to the Base Station, please re-pair the components that have not connected to the Base Station, beginning with the Dialer. How to pair the components is explained on page42.

6.If the components still do not connect to the Base Station, please contact Revolabs support.

Microphone, Speaker, or Dialer not paired with Base Station

Please follow the descriptions on page 42 on how to pair the different components with the Base Station.

49

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Models Revolabs FLX2TM10-FLX2SYSGUIDE-EN Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Connecting the Base Station Quick setup for Telephone Conference CallsConnecting the Charger Base Making a call Unpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones Page Calling Configurations Initial SetupConnecting System Cables Speaker ModeBluetooth Call Handset ModeTelephone Call Video Conference CallPlacing a Telephone Call FLX Home ScreenIgnoring an Incoming Telephone Call Answering an Incoming Telephone CallCalling a Directory Contact Ending a Telephone callActive Call Management Caller IDActive Call Menu Muting a CallPlacing a Call on Hold Conference Call Charging Components during a CallCall Waiting DialerMicrophones SpeakerActivating Bluetooth BluetoothManaging the Device Registry Device ListAdding a Device Removing a Device Viewing Device DetailsAccepting Device Connection Request Answering a call via Bluetooth Making a call via BluetoothSetting Device Trust Level Configuring the Analog Audio Connecting a Video Conference SystemVideo Conference Collaboration Making a Video CallMixing the audio signals Menu Hierarchy FLX2 System ConfigurationMenu Navigation Recent Call Log Recent CallsCall Recent Caller Save Recent Caller as Contact View Recent Call InformationDelete Recent Call Entry Delete Call History ContactsView Contact List Add a ContactDelete a Contact Edit a ContactView Contact Information Search for ContactCall Contact Audio Control Speaker VolumeSet Speed Dial Calling a Speed Dial NumberEqualizer EQ RingerAudio Mixer Device Status BluetoothSystem Information System InfoHome SetupCall DisplayAdvanced Setup Bluetooth, Audio, System InfoAll Mic Mute OFF AEC Setting System Name Pairing Microphone LED Pairing IndicatorsDialer On/Off Power On/Off the System ComponentsSpeaker On/Off Microphones On/Off Connecting using AUX in / AUX OUTSpeaker/Microphone Low Battery TroubleshootingDialer Low Battery Speaker / Microphone Link LostMicrophone, Speaker, or Dialer not paired with Base Station Base Power LostDialer Link Lost Two phones using the same extension Telephone Interface problemsCannot dial numbers Line in Use even though there is no callDevice LED Indicator Status Microphone in Charger Base LED IndicatorsSpeaker not in Charger Base Speaker will power down after two minutes Reset to Factory DefaultsFLX Technical SpecificationsCharger Base FCC Notice to Users Regulatory InformationIndustry Canada Notice to Users Export Law Assurance Restricted use with certain medical devicesNorth American Upcs Usage Restriction European Union Usage RestrictionModel Model Numbers Declaration of ConformityActa Part 68 information Limited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support
Top Page Image Contents