Revolabs 10-FLX2-002-POTS, 10-FLX2-200-POTS, 10-FLX2-020-POTS Microphone, LED Pairing Indicators

Page 45

7.After a short time an overlay will appear on the FLX Dialer saying „Pairing Successful‟, after which the screen should read „SPK 1 Linked‟.

8.If pairing was unsuccessful, the Speaker will show an alternating red -green slow blinking sequence indicating that the pairing failed. The Dialer will display a „Pairing Timeout‟ message. In that case the pairing procedure should be repeated.

Microphone

1.To pair a Microphone, turn off the Microphone by holding the mute button until the LED turns red if it is not already turned off.

2.Ensure that the Base Station is plugged in and powered up.

3.On the Dialer, browse to the Pairing menu: Menu  Setup  Advanced Setup  Pairing.

4.Select MIC 1 (Microphone 1) or MIC 2 (Microphone 2) and press the „Enter‟ key to enter pairing state.

5.The screen will display „Pairing Mic 1‟ or „Pairing Mic 2‟ depending on which

Microphone you are pairing.

6.Press the mute button on the Microphone and hold it until the LED turns solid red. The Microphone is now in pairing mode.

7.After a short time an overlay will appear on the Dialer „Pairing Successful‟, after

that the screen should read „MIC 1 Linked‟ or „MIC 2 Linked‟, based on which one you were linking.

9.If pairing was unsuccessful, the Microphone will show an alternating red - green slow blink sequence, indicating that the pairing failed. The Dialer will display a „Pairing Timeout‟ message. In that case the pairing procedure should be repeated.

LED Pairing Indicators:

	Speaker Indicator			Status
	Speaker Indicator			Status

	Steady Red			Speaker is in Pairing Mode, either waiting or pairing in progress

	Slow red- green flash			Pairing failed or timed out
	Green flash			Pairing successful
	Microphone Indicator			Status
	Steady Red			Pairing Mode, either waiting or pairing in progress

	Slow red – green flash			Pairing failed or timed out
	Green flash			Pairing successful

45

Image 45

Contents Models Revolabs FLX2TM10-FLX2SYSGUIDE-EN Introduction Safety WarningsContents GPL Licensed Software GNU General Public License General Information Quick setup for Telephone Conference Calls Connecting the Base StationConnecting the Charger Base Making a call Unpacking DescriptionFLX2 Base Station Installing FLX2 ComponentsFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones Page Calling Configurations Initial SetupConnecting System Cables Speaker ModeBluetooth Call Handset ModeTelephone Call Video Conference CallPlacing a Telephone Call FLX Home ScreenIgnoring an Incoming Telephone Call Answering an Incoming Telephone CallCalling a Directory Contact Ending a Telephone callActive Call Management Caller IDMuting a Call Active Call MenuPlacing a Call on Hold Conference Call Charging Components during a CallCall Waiting DialerMicrophones SpeakerActivating Bluetooth BluetoothManaging the Device Registry Device ListAdding a Device Viewing Device Details Removing a DeviceAccepting Device Connection Request Making a call via Bluetooth Answering a call via BluetoothSetting Device Trust Level Configuring the Analog Audio Connecting a Video Conference SystemVideo Conference Collaboration Making a Video CallMixing the audio signals FLX2 System Configuration Menu HierarchyMenu Navigation Recent Calls Recent Call LogCall Recent Caller View Recent Call Information Save Recent Caller as ContactDelete Recent Call Entry Delete Call History ContactsView Contact List Add a ContactDelete a Contact Edit a ContactSearch for Contact View Contact InformationCall Contact Audio Control Speaker VolumeSet Speed Dial Calling a Speed Dial NumberRinger Equalizer EQAudio Mixer Device Status BluetoothSystem Information System InfoHome SetupCall DisplayAdvanced Setup Bluetooth, Audio, System InfoAll Mic Mute OFF AEC Setting System Name Pairing Microphone LED Pairing IndicatorsPower On/Off the System Components Dialer On/OffSpeaker On/Off Microphones On/Off Connecting using AUX in / AUX OUTSpeaker/Microphone Low Battery TroubleshootingDialer Low Battery Speaker / Microphone Link LostBase Power Lost Microphone, Speaker, or Dialer not paired with Base StationDialer Link Lost Two phones using the same extension Telephone Interface problemsCannot dial numbers Line in Use even though there is no callDevice LED Indicator Status Microphone in Charger Base LED IndicatorsSpeaker not in Charger Base Speaker will power down after two minutes Reset to Factory DefaultsFLX Technical SpecificationsCharger Base Regulatory Information FCC Notice to UsersIndustry Canada Notice to Users Export Law Assurance Restricted use with certain medical devicesNorth American Upcs Usage Restriction European Union Usage RestrictionModel Model Numbers Declaration of ConformityActa Part 68 information Limited Warranty Limited Warranty and Limitation of LiabilityDisclaimer Preamble GPL Licensed SoftwarePage Page Page No Warranty Technical Support