Lincoln Electric SVM132-A Wire Reel Loading K1524-1 Universal Wire Reel Stand, Adapter

B-9 OPERATION B-9

Return to Master TOC

WIRE REEL LOADING (K1524-1

UNIVERSAL WIRE REEL STAND)

TO MOUNT A 30 lb (14 kg) READI-REEL PACKAGE (USING THE MOLDED PLASTIC

K363-P READI-REEL ADAPTER):

The spindle should be located in the LOWER mount- ing hole.

6.Set one of the Readi-Reel inside cage wires on the slot in the retaining spring tab.

7.Lower the Readi-Reel to depress the retaining spring and align the other inside cage wires with the grooves in the molded adapter.

8.Slide the cage all the way onto the adapter until the retaining spring “pops up” fully.

Return to Master TOC

1.Depress the Release Bar on the Retaining Collar and remove it from the spindle. See Figure B.6.

2.Place the Adapter on the spindle.

3.Re-install the Retaining Collar. Make sure that the Release Bar “pops up” and that the collar retainers fully engage the retaining groove on the spindle.

4.Rotate the spindle and adapter so the retaining spring is at the 12 o’clock position.

5.Position the Readi-Reel so that when it rotates the wire is de-reeled from the bottom of the coil.

CAUTION

Check to be sure the Retaining Spring has fully returned to the locking position and has SECURELY locked the Readi-Reel cage in place. The Retaining Spring must rest on the cage, not the welding electrode.

____________________________________

9.To remove the Readi-Reel from the Adapter, depress the retaining spring tab with a thumb while pulling the Readi-Reel cage from the molded adapter with both hands. Do not remove the Adapter from the spindle.

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

FIGURE B.6 – READI-REEL MOUNTING

ADAPTER

2 IN. O.D.￿

SPINDLE RETAINING ￿ SPRING

BRAKE ￿
HOLDING ￿	RETAINING￿
PIN
GROOVES	COLLAR

READI-REEL

INSIDE CAGE ￿

WIRES RELEASE ￿

BAR

LN-8