OPERATION | ||
|
| |
|
|
|
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Read and understand this entire section before operating your machine.
SAFETY INSTRUCTIONS
WARNING
ELECTRIC SHOCK can kill.
•Do not touch electrically live parts such as output terminals or internal wiring.
•Insulate yourself from the work and ground.
•Always wear dry insulating gloves.
____________________________________
FUMES AND GASES can be dangerous.
• Keep your head out of fumes.
•Use ventilation or exhaust to remove fumes from breathing zone.
____________________________________
WELDING, CUTTING and
GOUGING SPARKS
can cause fire or explosion
CONTROLS AND THEIR
FUNCTIONS
CONSTANT CURRENT CONTROLS
Operator controls for welding using a constant current power source are illustrated in Figure B.1. Refer to the figure and the following explanations of the controls.
FIGURE B.1 – CONSTANT CURRENT CONTROLS
CURRENT
CONTROL
VOLTAGE
CONTROL
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
• Keep flammable material away.
•Do not weld, cut or gouge on containers that have held combustibles.
____________________________________
ARC RAYS can burn.
• Wear eye, ear and body protection.
____________________________________
Only qualified personnel should operate this equip- ment. Observe all safety information throughout this manual.
CIRCUIT |
BREAKER |
TRIGGER |
INTERLOCK |
WIRE FEED
DIRECTION
CONTROL
GROUND LEAD
PROTECTOR RESET BUTTON
