Revolabs 10-FLX2-020-POTS, 10-FLX2-200-POTS manual FLX Home Screen, Placing a Telephone Call

Page 18

NOTE: When using the FLX connected through the AUX IN and AUX OUT to another device, only the FLX speaker can be used. All other speakers must be switched off. Any Echo Cancellation provided on the Video Conferencing unit must be switched off.

NOTE: For security reasons, Microphones will not send any audio signal to the AUX OUT connector when in the charger. To receive audio signal on the AUX OUT, microphones have to be taken out of the Charger Base.

FLX Home Screen

Whenever the FLX is not in a call, the FLX Dialer will show the FLX Home Screen. If time and date have been set or received from the network, the screen will show this information. Otherwise it will be blank.

From the home screen a call can be started, or the system menu can be entered.

Placing a Telephone Call

1.From the home screen on the FLX Dialer enter the phone number to be called.

2.Once the number is entered completely, press the green „call‟ button to initiate the phone call.

3.If any Microphones are out of the Charger Base and active, the call will default to „speaker mode‟ and will be identified by the ring tone being played out of the Speaker.

4.If no Microphones are outside the Charger Base the call will default to „handset mode‟ and the call will take place on the FLX Dialer.

18

Image 18
Contents Revolabs FLX2TM Models10-FLX2SYSGUIDE-EN Safety Warnings IntroductionContents GPL Licensed Software GNU General Public License General Information Quick setup for Telephone Conference Calls Connecting the Base StationConnecting the Charger Base Making a call Description UnpackingInstalling FLX2 Components FLX2 Base StationFLX2 Charger Base FLX Dialer FLX Speaker FLX Microphones Page Connecting System Cables Initial SetupCalling Configurations Speaker ModeTelephone Call Handset ModeBluetooth Call Video Conference CallFLX Home Screen Placing a Telephone CallAnswering an Incoming Telephone Call Ignoring an Incoming Telephone CallActive Call Management Ending a Telephone callCalling a Directory Contact Caller IDMuting a Call Active Call MenuPlacing a Call on Hold Call Waiting Charging Components during a CallConference Call DialerSpeaker MicrophonesManaging the Device Registry BluetoothActivating Bluetooth Device ListAdding a Device Viewing Device Details Removing a DeviceAccepting Device Connection Request Making a call via Bluetooth Answering a call via BluetoothSetting Device Trust Level Video Conference Collaboration Connecting a Video Conference SystemConfiguring the Analog Audio Making a Video CallMixing the audio signals FLX2 System Configuration Menu HierarchyMenu Navigation Recent Calls Recent Call LogCall Recent Caller View Recent Call Information Save Recent Caller as ContactDelete Recent Call Entry View Contact List ContactsDelete Call History Add a ContactEdit a Contact Delete a ContactSearch for Contact View Contact InformationCall Contact Set Speed Dial Speaker VolumeAudio Control Calling a Speed Dial NumberRinger Equalizer EQAudio Mixer System Information BluetoothDevice Status System InfoCall SetupHome DisplayBluetooth, Audio, System Info Advanced SetupAll Mic Mute OFF AEC Setting System Name Pairing LED Pairing Indicators MicrophonePower On/Off the System Components Dialer On/OffSpeaker On/Off Connecting using AUX in / AUX OUT Microphones On/OffDialer Low Battery TroubleshootingSpeaker/Microphone Low Battery Speaker / Microphone Link LostBase Power Lost Microphone, Speaker, or Dialer not paired with Base StationDialer Link Lost Cannot dial numbers Telephone Interface problemsTwo phones using the same extension Line in Use even though there is no callLED Indicators Device LED Indicator Status Microphone in Charger BaseSpeaker not in Charger Base Reset to Factory Defaults Speaker will power down after two minutesTechnical Specifications FLXCharger Base Regulatory Information FCC Notice to UsersIndustry Canada Notice to Users North American Upcs Usage Restriction Restricted use with certain medical devicesExport Law Assurance European Union Usage RestrictionDeclaration of Conformity Model Model NumbersActa Part 68 information Limited Warranty and Limitation of Liability Limited WarrantyDisclaimer GPL Licensed Software PreamblePage Page Page No Warranty Technical Support