Stow SFCS-16 manual Troubleshooting, Electric Motor, Operational Problems, Requirements

Page 32

TROUBLESHOOTING

Troubleshooting

ELECTRIC MOTOR.

MOTOR FAILS TO START

ON/OFF switch in the OFF position. Place switch in the ON position.

Thermal protection switch activated. Allow time for motor to cool. Motor will not start until the temperature is reduced low enough for the red switch located near the capacitor to be activated.

GFI switch activated. Push GFI button to test and rearm. Reconnect to power source.

Improper extension cord connection. Determine all connections produce a closed circuit.

No power being received from power source. Check power source for correct voltage and amperage requirements.

MOTOR LOSES POWER

Check power source for correct voltage and amperage requirements.

High operating temperatures. Clean fan blades and exterior surfaces.

OPERATIONAL PROBLEMS.

UNEVEN BLADE WEAR

Incorrect blade installation. See INSTALLING A

BLADE OR CERAMIC TILE RIPPER ATTACHMENT IN THE FLOOR COVERING SCRAPER.

Damaged exciter plate. Replace plate.

Damaged elastomeric rubber mount(s). Replace mount(s).

Bent blade. Replace blade.

EXCESSIVE JUMPING ON THE WORK SURFACE

Incorrect blade or ceramic tile ripper attachment installation. See INSTALLING A BLADE OR

CERAMIC TILE RIPPER ATTACHMENT IN THE FLOOR COVERING SCRAPER.

Damaged exciter plate. Replace plate.

Damaged elastomeric rubber mount(s). Replace mount(s).

Improper blade angle. Readjust blade angle.

ACCELERATED EXCITER SHAFT BEARING WEAR AND/OR FAILURE

Misaligned and/or improperly tensioned bearing housing/mounting surfaces. Replace bearing and realign bearing housing/mounting surface.

Bent electric motor shaft. Replace motor.

Improper lubrication. See LUBRICATION

REQUIREMENTS.

DIFFICULTY IN OPERATING THE BACK SAVER™ BLADE CONTROL SYSTEM

Misaligned jackscrew bearing. Loosen and realign.

Improper lubrication. See LUBRICATION

REQUIREMENTS.

Bent jackscrew. Replace jackscrew and flexible joint assembly.

UNEVEN COVERING MATERIAL REMOVAL

Excessive material build-up on caster wheel face surface. Remove material. Readjust wheel scraper to wheel gap setting: .03/.06 inch (.8/1.5 mm).

Excessive caster wheel bearing wear. Replace caster wheel and shoulder type capscrew.

Excessive axle shoulder type capscrew wear. Replace capscrew. Check caster wheel bearing for wear. Replace as necessary.

Damaged elastomeric rubber mount(s). Replace mount(s).

Damaged exciter plate. Replace plate.

Bent blade. Replace blade

SFCS-16

OPERATION AND PARTS MANUAL REV #3 (02/23/06)

PAGE 32

 

 

 

Image 32
Contents Floor Covering Scraper Model SFCS-16 Page Stow SFCS-16 Floor Covering Scrapper Here’s how to get help Stow Construction EquipmentSFCS-16 Operation and Parts Manual REV #3 02/23/06 SFCS-16 Operation and Parts Manual REV #3 02/23/06 Operator Instructional Data Sheet Safety Precautions Operation MAINTENANCE, Repair and Storage Assembly Removing the Floor Covering Scraper from the PalletBefore Starting the Motor Theory of OperationAngled Mastic Removal Blade Straight Beveled Scoring Blades Result in Property Damage AND/OR Personal Injury Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Operation Transporting the Floor Covering ScraperFloor Covering SCRAPER. Figure Adjusting the Operator Handle Height Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Assembly INSTRUCTIONS/OPERATION Stopping the Floor Covering Scraper on the Jobsite Assembly INSTRUCTIONS/OPERATION Service Preventative Maintenance Check ListAssembly INSTRUCTIONS/OPERATION Electric Motor Service Troubleshooting Operational ProblemsElectric Motor RequirementsStorage StorageGeneral SpecificationsFrame SFCS-16 Operation and Parts Manual REV #3 02/23/06 Explanation of Code in Remarks Column Recommended Spare Parts Adjustable Axle Assy Part Name QTY RemarksReplacement Cutting Blades Assy Part Name Frame Assy Part Name QTY Remarks Frame Assy SFCSSP80430 BEARING, Flange Operator Handle Assy HANDLE, Lower Decals Decals Part Name QTY Special Expediting Service PRICING, Rebates SpecificationsPayment Terms Freight PolicySFCS-16 Operation and Parts Manual REV #3 02/23/06 Heres HOW to GET Help FAX