|
| SPECIFICATIONS |
|
Specifications |
|
|
|
FRAME |
|
|
|
STRUCTURE | Unitized, Welded Steel Plate | ||
DRIVE SYSTEM | Random 0rbit, Direct Shaft Mount. | ||
NUMBER OF ELASTOMERIC RUBBER MOUNTS | 4 |
| |
WIDTH | |||
WIDTH (AT OPERATOR HANDLE) | 23 inches (584 mm) | ||
LENGTH (HANDLE FOLDED) | 24 inches (610 mm) | ||
LENGTH (OPERATING CONFIGURATION) | 34 inches (864 mm) | ||
HEIGHT (HANDLE FOLDED) | 23 inches (584 mm) | ||
HEIGHT (MAXIMUM HANDLE EXTENSION | 42inches (1067 mm) | ||
GENERAL |
|
|
|
WEIGHT (WITH EXTERNAL WEIGHT |
|
| |
LESS BLADE) | 130 lbs (59 kg) | ||
EXTERNAL WEIGHT, EACH | 14 lbs (6 kg) | ||
NUMBER OF BLADE OSCILLATIONS | 1725 PER MINUTE | ||
ELECTRIC MOTOR | 3/4 hp, 1725 RPM, 10.3 full loaded amperes @ 115 VAC, 60 Hz, thermally protected. | ||
The electric motor requires a clean (no other electric products on the same circuit) 15 ampere capacity circuit to properly function. The motor can be wired to also operate from a 230 VAC, 60 Hz, power source. Contact the Customer Service Department for specific information.
| OPERATION AND PARTS MANUAL REV #3 (02/23/06) | PAGE 34 |
|
|
|