|
| SPECIFICATIONS |
Specifications |
| |
FRAME |
| |
STRUCTURE | Unitized, Welded Steel Plate | |
DRIVE REDUCTION SYSTEM | 3VX335 Belt/Pulley | |
DRIVESHAFT SIZE AND CONFIGURATION | ||
MAXIMUM CUTTING DEPTH | ||
MAXIMUM CUTTING WIDTH | ||
MAXIMUM MACHINE LENGTH | ||
MAXIMUM OPERATOR HANDLE HEIGHT | ||
OVERALL MACHINE WIDTH | ||
CUTTING PROXIMITY TO LATERAL BORDER | ||
VACUUM CLEANER CONNECTION | ||
GENERAL |
| |
8FP/E BASIC WEIGHT | 155 lbs (71 kg), less drum and flails. | |
8FP/G BASIC WEIGHT | 160 lbs (73 kg), less drum and flails. | |
MAXIMUM GOVERNED ENGINE | 3450 RPM | |
SPEED FOR 5 HP CATEGORY, |
| |
4 CYCLE, HONDA GX160 GASOLINE ENGINE |
|
8FP/E ELECTRIC MOTOR | 5.0 Hp, 3450 RPM, 21 amperes full load @ 230 VAC, 60 Hz, 23 amperes full load |
@220 VAC, 50 Hz or The electric motor requires a clean (no other electric products on the same circuit) capacity
10 ampere capacity circuit to properly function at 230 VAC, 60 Hz.
8FP FLOOR PLANER SERIES | OPERATION AND PARTS MANUAL REV #1 (10/27/06) | PAGE 47 |
|
|
|