Jet Tools operating instructions Introduction Specifications, JJ-6CSX JJ-6CSDX

Page 7

Introduction

This manual is provided by WMH Tool Group covering the safe operation and maintenance procedures for\ Models JJ-6CSX and JJ-6CSDX Jointers. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.

Specifications

Model

 

JJ-6CSX

JJ-6CSDX

Stock Number – Bed and Stand Kit

................................ 708457K

.............................................708457DXK

Stock Number – Bed Assembly

.......................................

708457J

............................................. 708457DXJ

Stock Number Stand

708457S

.............................................708457DXS

Cutting Capacity

6-1/16"W x 1/2"D

.................................... 6-1/16"W x 1/2"D

Cutterhead Speed

4800 RPM

............................................... 6000 RPM

Number of Knives

3

.............................................................. 3

Rabbeting Capacity

1/2"

..........................................................1/2"

Rabbet Ledge

3-1/8" x 8-3/4"

......................................... 3-1/8" x 8-3/4"

Table Surface

7-1/4"W x 45-3/4"L x 31-1/4"H

...................... 7-1/4"W x 56"L x 31-1/4"H

Fence

3-7/8"H x 29-1/8"L

...................................3-7/8"H x 32-3/4"L

Blade Size

6-1/16" x 5/8" x 1/8"T

............................ 6-1/16" x 3/4" x 5/64"T

Fence Tilts Right

45º

...........................................................45º

Positive Stops

45º, 90º

................................................... 45º, 90º

Motor

 

115/230V, 60Hz, 1HP, 1Ph

115/230V, 60Hz, 1HP, 1Ph

...........................................................

...............................................................................

Prewired 115V

........................................ Prewired 115V

Net Weight (approx.)

215 lbs.

.................................................... 237 lbs

Shipping Weight

230 lbs.

.................................................... 258 lbs

The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.

7

Image 7
Contents Woodworking Jointer More Information WMH Tool Group Warranty WarrantyTable of Contents Page Page On-Off Switch Padlock JJ-6CSX JJ-6CSDX Introduction SpecificationsUnpacking Shipping ContentsUnpacking and Cleanup AssemblyInstalling Bed to Stand Installing the Drive Belt Installing Fence to BedInstalling Dust Chute Installing Belt GuardInstalling Cutterhead Guard Installing Access CoverGrounding Instructions ElectricalVolt Operation To tilt fence backward AdjustmentsDrive Belt Tension Fence Movement90º Fence Adjustment Fence Stop AdjustmentsInfeed Table Depth Stop Gib AdjustmentSetting Cutterhead Knives JJ-6CSX Replacing Knives JJ-6CSX Outfeed Table Adjustment Setting Cutterhead Knives JJ-6CSDX Replacing Knives JJ-6CSDX Setting Knives for Rabbeting and NicksDetermining Correct Table Height Operation Operating ControlsSurfacing Hand PlacementEdge Jointing Jointing Short or Thin Work RabbetingJointing Warped Surfaces Blade Care MaintenanceBeveling Direction of GrainCutterhead Removal Lubrication Troubleshooting Operating ProblemsTroubleshooting Mechanical and Electrical Problems Ordering Replacement Parts Optional AccessoriesParts Index No. Part No Description Size Qty Fence Parts All ModelsFence Assembly All Models TS-0267041 Stand Parts All ModelsStand Parts and Assembly All Models JJ6CSDX-403 Bed Parts All ModelsTS-0207021 Socket Head Cap Screw JJ-6CSDX Cutterhead Parts and Assembly JJ-6CSX JJ6CSDX-101 Cutterhead Parts and Assembly JJ-6CSDXWiring Diagram All Models Page WMH Tool Group