Grizzly G1182HW instruction manual G1182Z layout

Model G1182Z (Figure 2C)

• Jointer Assembly

• Fence Assembly

• Stand Assembly

• Dust Hood

• Hardware

-Hex Bolts 3⁄8" - 16 x 3⁄4"	3
-Lock Washers 3⁄8"	3
-Allen®Wrench 3mm	1
-V-Belt	1
-Knife Setting Jig	1
-Tilt Lever	1
-Knob	1
-Locking Screw	1
-Flat Washer 1⁄2"	1
-Special Nut	1

Figure 2C. G1182Z layout.

Model G1182ZX (Figure 2D)

Same as G1182Z above except the on/off switch is replaced by a pedestal mounted electrical switch assembly.

Figure 2D. G1182ZX layout.

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expediency, replacements can be obtained at your local hard- ware store.

G1182 6" Series Jointers -9-