Powermatic 1285 operating instructions

Page 6

36.Before attempting to joint or plane, each work piece must be carefully examined for stock condition and grain orientation. NOTE: At certain times it may be necessary to plane against the grain when working with a swirl grain wood or burls. With this type of work the operator must use a lesser depth of cut and a slow rate of feed.

Familiarize yourself with the following safety notices used in this manual:

This means that if precautions are not heeded, it may result in minor injury and/or possible machine damage.

This means that if precautions are not heeded, it may result in serious injury or possibly even death.

- - SAVE THESE INSTRUCTIONS - -

6

Image 6

Contents Jointer Part No. M-0460216Warranty and Service More Information WMH Tool Group WarrantyTable of Contents Page Figure a Page Introduction Specifications 90, 45 right, 45 leftContents of the Shipping Container UnpackingAssembly Fence InstallationTools need for assembly Switch Arm Grounding InstructionsDust Hood Voltage Conversion Extension cordsAdjustments Setting Outfeed Table HeightDrive Belt Tension Page Setting Infeed Table Height Depth of Cut Replacing and Setting Knives Straight CutterheadPage Replacing Knife Inserts Helical Cutterhead To tilt fence forward Fence AdjustmentsTo check and adjust the 90-degree stop To tilt fence backwardOperation To check and adjust the 45-degree stopOperating Controls Cutter Guard TensionSurfacing Hand PlacementEdge Jointing RabbetingDirection of Grain Jointing Warped SurfacesJointing Short or Thin Work BevelingMaintenance LubricationCutterhead Repairs Knife Inserts Helical Cutterhead Whetting Knives Straight Cutterhead Troubleshooting Operating Problems TroubleProbable Cause Remedy Troubleshooting Mechanical and Electrical Problems Trouble Probable Cause RemedyIf electric motor is suspect, you have Optional Accessories Replacement PartsParts List Stand Assembly Index No. Part No Description Size QtyStand Assembly Parts List Table Assembly Table Assembly Parts List Motor Pulley Assembly Motor Pulley Assembly Parts List Cutterhead Guard Assembly Cutterhead Guard Assembly Parts List Straight Cutterhead Assembly PJ1285-KSGAStraight Cutterhead Assembly Parts List Helical Cutterhead Assembly Helical Cutterhead Assembly Parts List Fence Assembly Fence Assembly Electrical Connections 1 Phase Electrical Connections 3 Phase WMH Tool Group

Related manuals

Manual 40 pages 39.08 Kb