![](/images/new-backgrounds/1328427/32842733x1.webp)
Fence Adjustments
The fence (A, Figure 22) tilts backward and forward to 45 degrees. It has a
To tilt fence forward:
1.Loosen the lock handle (D, Figure 22) and tilt the fence forward using the handle (E, Figure 22). NOTE: Lift up slightly on the fence while tilting it, to prevent scratching the table surface.
2.Retighten lock handle (D, Figure 22).
To tilt fence backward:
1.Loosen the lock handle (D, Figure 22) and pivot the stop block (F, Figure 22) out of the way.
2.Tilt the fence using the handle (E, Figure 22). NOTE: Lift up slightly on the fence while tilting it to prevent scratching the table surface.
3.Retighten lock handle (D, Figure 22).
To move fence forward or backward:
1.Loosen lock handle (G, Figure 22) and rotate handwheel (H, Figure 22); counterclockwise for forward fence movement, clockwise for backward fence movement.
2.When desired position is reached, securely tighten lock handle (G, Figure 22).
To check and adjust the 90-degree stop:
1.Loosen lock handle (D, Figure 23) and tilt fence until the stop screw (B, Figure 23) contacts the stop block (F, Figure 23).
2.Place a square or machinist’s protractor (not provided) on the table and flush against the fence surface. See Figure 23.
3.If adjustment is necessary, loosen the hex nut on the stop screw (B, Figure 23) and turn the stop screw as needed until the fence is flush with your square.
4.Retighten the hex nut.
Figure 22
Figure 23
17