Introduction
This manual is provided by Powermatic covering the safe operation and maintenance procedures for a Model 1285 Jointer. This manual contains instructions on installation, safety precautions, general operating procedures, maintenance instructions and parts breakdown. This machine has been designed and constructed to provide years of trouble free operation if used in accordance with instructions set forth in this manual. If there are any questions or comments, please contact either your local supplier or WMH Tool Group. WMH Tool Group can also be reached at our web site: www.wmhtoolgroup.com.
Specifications |
|
Model Number | 1285 |
Stock Number (3HP, 1Ph, 230V, with standard cutterhead) | 1791241 |
Stock Number (3HP, 3Ph, 230V/460V*, with standard cutterhead) | 1791249 |
Stock Number (3HP, 1Ph, 230V, with helical cutterhead) | 1791307 |
Stock Number (3HP, 3Ph, 230V/460V*, with helical cutterhead) | 1791308 |
Cutting Capacity (W x D) (in.) | |
Cutterhead Speed (RPM) | 5,000 |
Rabbeting Capacity (in.) | 3/4 |
Table Surface (L x W) (in.) | 84 x 12 |
Outfeed Table Height from Floor (in.) | |
Fence Size (L x W) (in.) | |
Fence Tilt (degrees) | 90, 45 right, 45 left |
Fence Positive Stops (deg.) | 45 and 90 |
Number of Knives – standard cutterhead | 3 |
Number of Inserts – helical cutterhead | 44, with 2 rabbeting |
Size of knives – standard cutterhead (L x W x T) (in.) | 12 x 13/16 x 1/8 |
Dust Collection Minimum CFM Required | 800 |
Approximate Net Weight (lbs.) | 762 |
Approximate Shipping Weight (lbs.) | 880 |
|
The above specifications were current at the time this manual was published, but because of our policy of continuous improvement, WMH Tool Group reserves the right to change specifications at any time and without prior notice, without incurring obligations.
7