Master Appliance PH-1100K, PH-2100 instruction manual Typical Applications, To Operate Heat Gun

Page 5

Operating Instructions

The proper amount of heat for each application is dependent upon the distance of the noz- zle from the work surface and the length of time that heat is applied to the work surface.

Before performing any appli- cation, we recommend that you experiment with a piece of scrap material. Use care in approaching the work until you find the proper combina- tion of heat adjustment con- trol, distance from the work surface, and the heat applica- tion time.

Use a gentle back and forth motion when applying heat unless it is found that a con- centrated heat is desired.

To Operate Heat Gun

1)Plug heat gun into properly rated outlet.

2)Move rocker switch to “Hot” position. Heat gun will come up to operating tem- perature in approximately two minutes.

3)Move switch to “Off” position.

CAUTION: Do not place unit on its side while using spreader or heat shrink attachments.

Typical Applications

Shrink Packaging

 

Strip Paint

 

Install Vinyl

Use low or high heat

 

Use low or high heat

 

Use low or high heat

 

 

 

 

 

 

 

 

 

 

Shrink Tubing

Bend PVC Tubing

Dry Film

Use low or high heat

Use high heat

Use low heat

5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Made in U.S.A Fabriqué aux États-Unis Hecho en EE.UU Proheat Heat GunDescription & Introduction SpecificationsRead These Instructions Important Safety InstructionsWear safety glasses at all times Important Safety Instructions cont’dMaster Appliance Corp Attn Repair Department 2420 18th Street Racine, WlPlug heat gun into properly rated outlet Typical ApplicationsTo Operate Heat Gun Stripping Paint Paint Stripping Safety InstructionsCleaning Maintenance InstructionsHeating Elements LubricationExploded View Item No Description Proheat Replacement PartsPH-1100 Attachments Description Wiring Diagram2420 18th Street Racine, WI Phone 262 Fax 262 Full One Year WarrantyCaractéristiques Description et introductionLisez ces instructions Importantes consignes de sécuritéImportantes consignes de sécurité suite Conservez ces instructions 2420 18th Street Racine, WI 53403 U.S.ATypes dapplications Mode demploiFonctionnement du pistolet Utilisez une chaleur faible Ou forteDécapage des surfaces peintes Consignes de sécurité pour le décapage de surfaces peintesRestez alerte. Ayez recours Éléments thermiques EntretienLubrification NettoyageVue en éclaté PH-1100 PH-2100 Darticle De pièce Description Pièces de rechange pour Proheat Heat GunSchéma de câblage Accessoires De pièce DescriptionGarantie intégrale dun an Especificaciones Descripción e introducciónPara quitar pintura, siga estas directrices Importantes instrucciones de seguridadDE Papel no SON Adecuadas Importantes instrucciones de seguridad continuatión2420 18th Street Racine, WI 53403 EE.UU La superficie de trabajoOtros desechos Aplicaciones típicas Instrucciones de operaciónPara operar su pistola de aire caliente Coloque el conmutador en la posición de OFF apagadoForma de remover la pintura Instrucciones de seguridad para remover pinturasUse guantes y gafas de Elementos calefactores Instrucciones de mantenimientoLubricación LimpiezaVista esquemática Descripción Piezas de repuesto ProheatPieza Rubro Aditamentos De pieza Descripción Diagrama de conexiones2420 18th Street Racine, WI 53403 EE.UU Teléfono 262 Fax 262 Garantía total por un añoNotas Notas 2420 18th St. Racine, WI

PH-2100, PH-1100K specifications

The Master Appliance PH-1100K and PH-2100 are industry-leading heat guns designed for professionals and DIY enthusiasts who demand reliability, performance, and versatility in their tools. Both models are engineered for a wide range of applications, including shrink wrapping, paint stripping, and surface drying, making them essential additions to any toolkit.

The PH-1100K features a compact and lightweight design, making it easy to handle during prolonged use. It boasts a powerful 1100-watt motor that delivers rapid heating and a maximum temperature of 1,100 degrees Fahrenheit. This model includes two heat settings, allowing users to adjust the temperature according to specific tasks. The integrated overload protection ensures safety, automatically shutting off the tool in case of overheating, thereby extending its lifespan.

For users seeking enhanced performance, the PH-2100 takes it a step further with an increased wattage of 2100 watts. This model heats up quickly and reaches a maximum temperature of 1,200 degrees Fahrenheit. It also features an adjustable air velocity control, which permits users to switch between high and low airflow settings, providing better control over the application. The ergonomic design of both models ensures comfort during extended use, with an easy-to-grip handle that minimizes fatigue.

One notable characteristic of the Master Appliance heat guns is their versatility in accessories. Both the PH-1100K and the PH-2100 come with a variety of nozzles that cater to specific tasks. For instance, the flat nozzle is perfect for wide surfaces such as drying paint, while the round nozzle focuses heat on a specific point, ideal for shrink tubing or removing adhesive.

These heat guns are built with durability in mind, featuring a rugged exterior that can withstand tough working conditions. They are also designed with cooling vents that prevent the motor from becoming too hot, ensuring consistent performance over long periods.

Overall, the Master Appliance PH-1100K and PH-2100 are exceptional heat guns that deliver power, safety, and versatility for any heating need. Whether you are a professional tradesperson or a home DIYer, these models provide the efficiency and reliability required to tackle a wide range of tasks with ease and confidence.
Top Page Image Contents