![](/images/new-backgrounds/1151161/15116119x1.webp)
Model HEAT PRO DELUXE How-to Use
The Model HEAT PRO DELUXE kit includes one hot air tool with LED display, specialized scrapers, nozzles and carrying case.
Model HEAT PRO DELUXE Specifications
Wattage | 44 to 1250 Watts |
Temperature | Low 100°F / High 1100°F |
Volts | 120 Volts |
AMPS | 0.5 to 10.5 AMPS |
Output | 68 BTU |
Weight | 1.8 lbs. |
Cord Length | 6 feet |
Settings | Hi, Lo, Off |
Operation of the Model HEAT PRO DELUXE
The following instructions are a general guideline for using the Model HEAT PRO DELUXE hot air tool. Every project is different so use these instructions as a starting point to determine the best heat set- ting and distance for your project. Before plugging the Model HEAT PRO DELUXE into an electrical out- let make sure the switch is in the Off position.
1.Plug into a standard outlet.
2.To start slide the switch to either the Lo or Hi position. The
Note: Smoke may appear during the initial start up due to the burning of manufacturing oils. The smoke should disappear in less than a minute.
Caution: If the blower motor in the hot air tool does not turn on when the switch is set to either Lo or Hi, turn the switch to Off imme- diately. The heating element will burn out if
it is not cooled by the blower.
3.For instructions on how to strip paint go to sec- tion HEAT GUN OPERATIONAL GUIDELINES, How to Strip Paint.
4.Use the dial to increase (+) or decrease
5.To turn off, slide the switch to the Off position and unplug. Make sure the Model HEAT PRO DELUXE is completely cooled before storing.
|
| Concentrator | |||
|
|
| Nozzle | Heart | |
|
|
|
| Scraper | |
Deflector | All Purpose | Triangle |
| ||
Scraper |
| Scraper | Hook | ||
Nozzle |
| ||||
| Scraper | Nozzle | |||
Window Protector | |||||
| |||||
Handle | Combination | ||||
Nozzle |
| ||||
|
| Scraper | |||
|
|
|
How To Attach Accessories to the Model HEAT PRO DELUXE
1.Set the Model HEAT PRO DELUXE upright on a level surface, make sure tip is cool.
2.Set the accessory nozzle on the top of the open nozzle and push firmly into place.
3.To remove, set hot air tool with nozzle facing up; wait for it to cool.
4.Pull the accessory nozzle off the top using a twisting motion and straight pull.
5.Only use accessories designed for this hot air tool.
| MODEL HEAT PRO DELUXE | ENGLISH 10 |