Powermatic WP2510 operating instructions Fast Program 10 sets, Entering preset target values

3. Fast Program (10 sets)

To facilitate frequently used positions, such as different board thicknesses, the keys 0 to 9 have associated preset target values. By pressing one of these keys, its target value is loaded automatically, and the positioning can be started immediately.

Entering preset target values:

Step 1: Press

Step 2: Select a key 0 to 9 (total of 10 values).

Step 3: Enter the target value.

Step 4: Press to confirm.

Follow the same procedure for entering the other preset target values.

Press to exit.

Example: Program 0 = 10.00mm; Program 1 = 20.00mm

Step 1: Press

Display

Step 2: Press

............................................. .[select program key 0]

Step 3: Press

............................................[enter value]

Step 4: Press

.................................................................[complete]

24