Delta 22-451, 22-450 instruction manual General Safety Rules

Page 4

GENERAL SAFETY RULES

READ AND UNDERSTAND ALL WARNINGS AND OPERATING INSTRUCTIONS BEFORE USING THIS EQUIPMENT. Failure to follow all instructions listed below, may result in electric shock, fire, and/or serious personal injury or property damage.

IMPORTANT SAFETY INSTRUCTIONS

1. FOR YOUR OWN SAFETY, READ THE INSTRUCTION

MANUAL BEFORE OPERATING THE MACHINE.

Learning the machine’s application, limitations, and

specific hazards will greatly minimize the possibility of

accidents and injury.

2. WEAR EYE AND HEARING PROTECTION.

ALWAYS USE SAFETY GLASSES. Everyday

eyeglasses are NOT safety glasses. USE CERTIFIED

SAFETY EQUIPMENT. Eye protection equipment

should comply with ANSI Z87.1 standards. Hearing

equipment should comply with ANSI S3.19

standards.

3. WEAR PROPER APPAREL. Do not wear loose

clothing, gloves, neckties, rings, bracelets, or other

jewelry which may get caught in moving parts. Nonslip

footwear is recommended. Wear protective hair

covering to contain long hair.

4. DO NOT USE THE MACHINE IN A DANGEROUS

ENVIRONMENT. The use of power tools in damp or

wet locations or in rain can cause shock or

electrocution. Keep your work area well-lit to prevent

tripping or placing arms, hands, and fingers in danger.

5. MAINTAIN ALL TOOLS AND MACHINES IN PEAK

CONDITION. Keep tools sharp and clean for best and safest

performance. Follow instructions for lubricating and changing

accessories. Poorly maintained tools and machines can further

damage the tool or machine and/or cause injury.

6. CHECK FOR DAMAGED PARTS. Before using the

machine, check for any damaged parts. Check for

alignment of moving parts, binding of moving parts,

breakage of parts, and any other conditions that may

affect its operation. A guard or any other part that is

damaged should be properly repaired or replaced.

Damaged parts can cause further damage to the

machine and/or injury.

7. KEEP THE WORK AREA CLEAN. Cluttered areas and

benches invite accidents.

8. KEEP CHILDREN AND VISITORS AWAY. Your shop is a

potentially dangerous environment. Children and visitors can

be injured.

9. REDUCE THE RISK OF UNINTENTIONAL STARTING.

Make sure that the switch is in the “OFF” position

before plugging in the power cord. In the event of a

power failure, move the switch to the “OFF” position.

Delta may cause damage to the machine or injury to the user.

14.USE THE PROPER EXTENSION CORD. Make sure your extension cord is in good condition. When using an extension cord, be sure to use one heavy enough to carry the current your product will draw. An undersized cord will cause a drop in line voltage, resulting in loss of power and overheating. See the Extension Cord Chart for the correct size depending on the cord length and nameplate ampere rating. If in doubt, use the next heavier gauge. The smaller the gauge number, the heavier the cord.

15.SECURE THE WORKPIECE. Use clamps or a vise to hold the workpiece when practical. Loss of control of a workpiece can cause injury.

16.FEED THE WORKPIECE AGAINST THE DIRECTION OF THE ROTATION OF THE BLADE, CUTTER, OR ABRASIVE SURFACE. Feeding it from the other direction will cause the workpiece to be thrown out at high speed.

17.DON’T FORCE THE WORKPIECE ON THE MACHINE. Damage to the machine and/or injury may result.

18.DON’T OVERREACH. Loss of balance can make you fall into a working machine, causing injury.

19.NEVER STAND ON THE MACHINE. Injury could occur if the tool tips, or if you accidentally contact the cutting tool.

20.NEVER LEAVE THE MACHINE RUNNING UNATTENDED. TURN THE POWER OFF. Don’t leave the machine until it comes to a complete stop. A child or visitor could be injured.

21.TURN THE MACHINE “OFF”, AND DISCONNECT THE MACHINE FROM THE POWER SOURCE before installing or removing accessories, before adjusting or changing set-ups, or when making repairs. An accidental start-up can cause injury.

22.MAKE YOUR WORKSHOP CHILDPROOF WITH PADLOCKS, MASTER SWITCHES, OR BY REMOVING STARTER KEYS. The accidental start-up of a machine by a child or visitor could cause injury.

23. STAY ALERT, WATCH WHAT YOU ARE DOING, AND

USE COMMON SENSE. DO NOT USE THE MACHINE WHEN YOU ARE TIRED OR UNDER THE INFLUENCE OF DRUGS, ALCOHOL, OR MEDICATION. A moment of inattention while operating power tools may result in injury.

24. USE OF THIS TOOL CAN GENERATE

 

An accidental start-up can cause injury.

10.

USE THE GUARDS. Check to see that all guards are

 

in place, secured, and working correctly to reduce

 

the risk of injury.

11.

REMOVE ADJUSTING KEYS AND WRENCHES

 

BEFORE STARTING THE MACHINE. Tools, scrap

 

pieces, and other debris can be thrown at high speed,

 

causing injury.

12.

USE THE RIGHT MACHINE. Don’t force a machine or

 

an attachment to do a job for which it was not

 

designed. Damage to the machine and/or injury may

 

result.

13.

USE RECOMMENDED ACCESSORIES. The use of

 

accessories and attachments not recommended by

4

AND DISBURSE DUST OR OTHER AIRBORNE PARTICLES, INCLUDING WOOD DUST, CRYSTALLINE SILICA DUST AND ASBESTOS DUST. Direct particles away from face and body. Always operate tool in well ventilated area and provide for proper dust removal. Use dust collection system wherever possible. Exposure to the dust may cause serious and permanent respiratory or other injury, including silicosis (a serious lung disease), cancer, and death. Avoid breathing the dust, and avoid prolonged contact with dust. Allowing dust to get into your mouth or eyes, or lay on your skin may promote absorption of harmful material. Always use properly fitting NIOSH/OSHA approved respiratory protection appropriate for the dust exposure, and wash exposed areas with soap and water.

Image 4
Contents DC-580 20 Planer Table of Contents Important Safety InstructionsSafety Guidelines Definitions California PropositionGeneral Safety Rules Additional Specific Safety Rules Failure to Follow These Rules MAY Result in Serious InjuryPower Connections Motor SpecificationsFunctional Description Grounding InstructionsCarton Contents AssemblyUnpacking and Cleaning Assembling Cutterhead Guard Assembling Dust HoodThree Phase Operation Electrical ConnectionsLocking Switch in OFF Position OperationStarting and Stopping the Planer Raising and Lowering TableDisconnect Machine from Power Source Feed Roller SpeedsChecking and Adjusting Table Roller Height Table RollersANTI-KICKBACK Fingers Checking and Adjusting Drive Belt Tension Checking and Adjusting Feed Roller Belt Tension CHECKING, Resetting Replacing Knives Adjusting Chipbreakers Setting KnivesConstructing Gage Block FA FAdjusting Pressure BAR Adjusting Outfeed RollerAdjusting Infeed Roller Adjusting and Replacing Knives Adjusting Table Height ScaleLeveling the Table Troubleshooting Maintenance Adjusting Table GibsService AccessoriesWarranty PARTS, Service or Warranty AssistanceCanadian PORTER-CABLE Delta Service Centers

22-451, 22-450 specifications

Delta 22-450 and Delta 22-451 are notable models within Delta's commitment to high-performance, precision woodworking tools. Designed for both amateur and professional woodworkers, these tools embody an ideal blend of innovation, usability, and durability.

One of the primary features of the Delta 22-450 is its powerful motor, which delivers reliable performance even under heavy workloads. This model is equipped with a 1.5 HP motor that ensures consistent power, allowing users to tackle various materials with ease. The motor is designed to operate quietly while minimizing vibrations, which enhances user comfort and precision during operation.

In contrast, the Delta 22-451 takes this a step further, boasting a slightly more robust 1.75 HP motor. This feature allows for increased cutting capacity and the ability to work with thicker and denser materials without bogging down. Both models come with a high-quality build, featuring cast-iron bases that provide stability and reduce vibration, further contributing to accuracy in cuts.

Another standout characteristic of the Delta 22-450 and 22-451 is their innovative fence system. Both models utilize a patented fence design that is easy to adjust and lock securely in place, providing users with confidence in their cutting precision. This technology makes repetitive cuts simple and accurate, which is invaluable when working on larger projects.

Additionally, safety is a key focus in the design of these tools. Delta has incorporated various safety features, such as blade guards and anti-kickback mechanisms, to protect users during operation. This attention to safety is crucial, especially for those who may be newer to woodworking or those operating in busy environments.

Furthermore, these models also feature a dust collection system that maintains a clean workspace. The integrated ports allow for connection to dust extraction systems, ensuring that the work environment remains clear of debris, which not only keeps the workspace safer but also improves visibility for more accurate work.

In summary, the Delta 22-450 and 22-451 are exceptional tools designed for both professional woodworkers and dedicated hobbyists. With powerful motors, advanced fence systems, robust safety features, and effective dust collection, these models are engineered to enhance the woodworking experience and deliver superior results. Their blend of reliability and innovative technology makes them worthwhile investments for anyone serious about woodworking.